Hardware Guide
Table Of Contents
- Fibocom_FM101-CG_Hardware_Guide_V1.0.pdf
- FM101-CG-20: Hardware Guide
- Contents
- Change History
- 1. Foreword
- 2. Product Overview
- 3. Pin Definition
- 4. Electrical Characteristics
- 5. Functional Interface
- 6. Radio Frequency
- 6.1. RF Interface
- 6.2. Operating Bands
- 6.3. Transmitting Power
- 6.4. Receiving Sensitivity
- 6.5. GNSS Receiving Performance
- 6.6. Antenna Design
- 6.7. PCB Routing Design
- 6.8. Main Antenna Design
- 6.9. Diversity and MIMO Antenna Design
- 6.10. GNSS Antenna Design
- 6.11. Other Interfaces
- 7. Thermal Design
- 8. Electrostatic Protection
- 9. Structural Specifications
- Appendix A: Acronyms and Abbreviations
- Module FCC & ISED警语 for Fibocom
6.1.3. RF Connector Dimensions
FM101-CG module adopts standard M.2 module RF connectors, the model name is
818004607 from ECT company, and the connector dimensions are 2 mm × 2 mm × 0.6
mm, as shown in the following figure.
Figure 18. RF connector dimensions
Figure 19. 0.81 mm coaxial cable matched RF connector dimensions
6. Radio Frequency
Copyright © Fibocom Wireless Inc. 44