User's Manual
Table Of Contents
- Applicability Table
- Copyright
- Notice
- Trademark
- Version Record
- 1 Foreword
- 2 Overview
- 3 Application Interface
- 4 Radio Frequency
- 5 Thermal Design
- 6 Structure Specification
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.
FIBOCOM FM150-NA User Manual Page 68 of 72
carrier TRP certification fail.
About antenna Design, please refer to the document FIBOCOM Design Guide_RF Antenna
5 Thermal Design
FM150 is designed to work on an extreme temperature range, to make sure the module can work
properly for a long time and achieve a better performance on conditions like maximum power or high
data transmission. Heat conducting material is strongly recommended to add between the bottom of
module and the customer main board. For more detail design, please refer to our document
FIBOCOM_FG150&FM150 Design Guide_Thermal.
6 Structure Specification
6.1 Product Appearance
The product appearance for FM150 module is shown in Figure6-1:
Figure 6-1 Module Appearance
6.2 Dimension of Structure
The structural dimension of the FM150 module is shown in Figure 6-2: