User's Manual
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.
FIBOCOM FM150-NA User Manual Page 30 of 75
3.1.2 Pin Definition
The pin definition is as follows:
Pin Pin Name I/O Reset Value Pin Description Type
1 CONFIG_3 O
NC
NC, FM150 M.2 module is configured
as the WWAN – PCIe, USB_SS
interface type.
-
2 VCC PI
-
Power input Power Supply
3 GND
-
-
GND Power Supply
4 VCC PI
-
Power input Power Supply
5 GND
-
-
GND Power Supply
6
FULL_CARD_
POWER_OFF#
I PU
Module power on/off input,
internal 20KΩ pull up
Power on: High/Floating
Power off: Low
CMOS
3.3/1.8V
7 USB D+ I/O
-
USB Data Plus 0.3-3V
8 W_DISABLE1# I PU WWAN Disable, active low
CMOS
3.3/1.8V
9 USB D- I/O
-
USB Data Minus 0.3-3V
10 LED1# O T System status LED, Output open drain -
11 GND
-
-
GND Power Supply
12 Notch
- -
Notch
-
13 Notch
- -
Notch
-
14 Notch
- -
Notch
-
15 Notch
- -
Notch
-
16 Notch
- -
Notch
-
17 Notch
- -
Notch
-
18 Notch
- -
Notch
-
19 Notch
- -
Notch
-
20 I2S_CLK O PD I2S Serial clock, Reserved CMOS 1.8V
21 CONFIG_0
- NC
NC, FM150 M.2 module is configured
as the WWAN – PCIe, USB_SS
interface type.
-
22 I2S_RX I PD I2S Serial receive data, Reserved CMOS 1.8V