- First International Computer Laptop User Manual

Outline of the A360
1-22 FIC A360 Service Manual
Internal HDD Sub-Menu
PhoenixBIOS Setup Utility
Main
Internal HDD [10056MB] Item Specific Help
Type: [Auto]
U
ser = you enter
Cylinders: [16383] Parameters of hard-disk
Heads: [16] Drive installed at this
Sectors: [63] Connection.
Maximum Capacity: 10056MB Auto = autotypes
Hard-disk drive
Multi-Sector Transfers: [16 Sectors] Installed here
LBA Mode Control: [Enabled] 1-39 = you select
32 Bit I/O: [Disabled] pre-determined type of
Transfer Mode: [FPIO 4 / DMA 2] hard-disk drive
SMART Monitoring: Enabled Install here.
Ultra DMA Mode: [Mode 4] CD-ROM = a CD-ROM drive
is installed here.
ATAPI Removable =
Removable disk drive is
installed here
F1 Help
K
Select Item −/+ Change Values F9 Setup Defaults
Esc Exit
ÅÆ
Select Menu Enter Select Sub-Menu F10 Save and Exit
Figure 1-14 Internal HDD/CD-ROM Sub-Menu
Type: [None] / [CD-ROM] / [User]
/ [Auto]
Select the drive type corresponding to the fixed
disk installed in your system. If type USER is
selected, Cylinders, Heads & Sectors edited
directly.
Cylinders: [16383] (BIOS auto detect, for information only)
Heads: [16] (BIOS auto detect, for information only)
Sectors: [63] (BIOS auto detect, for information only)
Maximum Capacity: 10056MB (BIOS auto detect, for information only)
Multi-Sector
Transfers:
[Disabled] / [2 Sectors] /
[4 Sectors] / [8 Sectors] /
[16 Sectors]
Determine the number of sectors per block for
multiple sector transfers.
LBA Mode Control: [Disabled] / [Enabled]
Enabling LBA causes Logical Block Addressing
to be used in place of Cylinders, Heads &
Sectors
32 Bit I/O:
[Disabled] / [Enabled]
This setting enables or disables 32 bit IDE data
transfers
Transfer Mode:
[Standard] / [Fast PIO 1] /
[Fast PIO 2] / [Fast PIO 3] /
[Fast PIO 4] / [FPIO 3 /
DMA1] / [FPIO 4 / DMA2]
Select the method for moving data to/from the
drive. Autotype the drive to select the optimum
transfer mode
SMART Monitoring [Disabled] / [Enabled] HDD provides the function of SMART Monitoring
Ultra DMA Mode: [Mode 1] / [Mode 2] (BIOS auto detect, for information only)