User Guide

Calibration, and change it to enabled. By pressing the Pg Dn key, you will get a message
stating. “Please make sure that the AC adapter & battery are present. Do you wish to do
battery auto-learning? (Y/N)” Press Y and then Enter. Once calibration is completed the
computer will prompt you to shutdown and restart.
1.7 Question:
What is the function of PHDISK.EXE program and how to use it?
Answer:
The PHDISK utility of the notebook allows you to create a Suspend-To-Disk (STD) partition or
file that is used to save the opened files when you activate STD mode and power off the
computer. If you want to make use of the STD feature, you need first to run the PHDISK
utility.
You could see a message appear in a red column during Power On Self Test before you
execute the PHDISK.EXE. The red column displays ?Save To Disk file not found. Save to
Disk feature is disabled. Run Phdisk for information.
File: creat new. Partition: consult manual. Hit any key to exit. ?The above message will
disappear after you have execute the Phdisk.exe.
The Phdisk program has support FAT 16 and FAT 32 format also. To know the more detail
information about PHDISK, you could execute Phdisk /? on the command from the directory
where the PHDISK command is located.
1.8 Question:
How to adjust the CPU jumper switch setting?
You could find the string on the CPU surface , ex 700/256/100/1.65V, the 700 means CPU
frequency, 256 means cache size, 100 means external frequency, and in the last, the 1.65V
means core voltage.
The A440 could detects the CPU frequency automatically. For the CPU, you just need to
adjust the external frequency only. for your reference. ( Remove the heat sink plate then you
could see the S4 jumper, in the upper side of CPU socket. )