- First International Computer Laptop User Manual

Outline of the M295 / M296
 Language – Language for each country. Default setting as US language.
 Boot Display Device – This field allows you to set the output boot display to
the LCD, CRT, or Both.
 Primary Master – This field displays various parameters for the hard disk
drive. If type [Auto] is selected, the system automatically sets these parameters. If
type [User] is selected, Cylinders, Heads and Sectors can be edited.
 Secondary Master – This field displays various parameters for the internal
CD-ROM or a DVD-ROM / Combo Drive.
 System Memory, Extended Memory, CPU Type, CPU Speed and
BIOS Version – These fields are for information only as the BIOS automatically
detects related values.
PhoenixBIOS Setup Utility
Main
Internal HDD [FUJITSU MHR2020AT] Item Specific Help
Type:
[
Auto]
U
ser = you enter
LBA Format Parameters of hard-disk
Total Sectors: 39070080 Drive installed at this
Maximum Capacity: 20004MB connection.
Auto = autotypes
Multi-Sector Transfers: [16 Sectors] Hard-disk drive
LBA Mode Control: [Enabled] Installed here.
32 Bit I/O: [Disabled] 1-39 = you select
Transfer Mode: [Fast PIO 4] Pre-determined type of
Ultra DMA Mode: [Mode 2] Hard-disk drive
Install here.
CD-ROM = a CD-ROM drive
Is installed here.
ATAPI Removable =
Removable disk drive is
installed here.
F1 Help
K
Select Item −/+ Change Values F9 Setup Defaults
Esc Exit
ÅÆ
Select Menu Enter Select Sub-Menu F10 Save and Exit
Figure 1-13 Internal HDD/CD-ROM Sub-Menu
1-22 FIC M295 / M296 Service Manual