User manual

22

Introduction
Dear Customer,
Thank you for purchasing this FIDEK power amplifier.
By purchasing this power amplifier you have invested in a product that has been
designed with state-of-the-art technology.
The product is designed in conformity with protection class I. In addition, the
appliance is fitted with noise suppression. This product therefore meets the
requirements of the applicable European and national directives. Its conformity
has been certified and the corresponding declarations and documents are kept
with the manufacturer.
You, as the user, must observe these operating instructions to maintain this status
and ensure safe operation.
For a fast response of your technical enquiries please use the
email
address listed below.
Germany: Fon. + 49 9604/40 88 80
Fax + 49 9604/40 88 48
e-mail: [e-mail]
Mon to Thurs 8.00am to 4.30pm
Fri 8.00am to 2.00pm
39
Technical data
Operating voltage 230 V~/50 Hz
Power consumption 2800 W (max.)
Fuse T10 A/250 V (6.3 x 32 mm)
Input sensitivity 1 V
Input impedance 10 kOhm (asymmetrical)
20 kOhm (asymmetrical)
Output power 2 x 450 W at 8 Ohm
2 x 720 W at 4 Ohm
2 x 1000 W at 2 Ohm
1 x 1350 W at 8 Ohm
1 x 1800 W at 4 Ohm
Frequency response 10 – 49.000 Hz (+/- 1 dB)
Distortion factor < 0,05%
S/N ratio > 100 dB
Channel separation > 60 dB
Subwoofer duplexer 40-200 Hz/12 dB/Oct.
LOW CUT filter 30/50 Hz/12 dB/Oct.
Dimensions 472 x 102 x 446 mm
Mass 21 kg