Installation Drawings

www.fieldcontrols.com
Please retain these instructions after installation.
This device MUST be installed by a qualified agency in accordance with the manufacturer's installation instructions. The definition of
a qualified agency is: any individual, firm, corporation or company which either in person or through a representative is engaged
in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the
precautions required, and has complied with all the requirements of the authority having jurisdiction.
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.
Installation Date:
Installed By: Phone:
MOUNTING LOCATION
DIAGRAMS
Model: GSK-3 SPILL SWITCH
Mounting location on an MG-1 4" - 9" Barometric draft control
GSK-3 SPILL SWITCH SPECIFICATION
Switching Voltage Millivolts Or 24VAC
Switch Open Temperature 180º F
Switch Type
Normally Closed
Manual Reset

Summary of content (4 pages)