User Guide

Page 5
Diagram
A
MAINTENANCE
WARNING: Disconnect power to
the transformer before commencing
inspection and cleaning.
NOTE: Wear disposable, non-
absorbent protective gloves prior to
inspection procedure in case of
accidental breakage of glass.
1. We recommend inspecting and
cleaning the lamp at least every 6
months. Frequency depends upon the
environment. Such as: the type of air
filter, duration of use and replacement
cycle.
2. To maintain maximum output intensity,
replace the UV-Aire lamp annually. The
lamp should operate continuously for
maximum lamp life and light
effectiveness.
Diagram B
WARNING: Never expose eyes or skin to UVC light from any source. Looking directly at the UVC light may cause permanen
t
eye damage or blindness. Never operate the UV-Aire Air Purifying System out of the plenum. Avoid touching the
glass portion of the lamp with your hands.