Product Overview

How It Works
The fresh Air System (FAV) is a
motor driven damper activated
by the Fresh Air Ventilation
Control (FAVC). When there is
a call for fresh air, the control
opens the damper allowing fresh
air to enter the HVAC return.
When the control is satisfied, the
damper is closed.
CFM Cool/Heat Vent
dial
The CFM Cool Vent dial and
CFM Heat Vent dial are both
preset at 400 CFM each and
can be used to set the air flow
rate through a Fresh Air Damper
or HRV/ERV unit when central
fan is running in cooling mode
and heating mode.
CFM Continuous dial
The CFM Continuous dial controls the continuous
ventilation rate based on size of the home and number of
bedrooms and is pre-set at 100 CFM.
Outdoor Temperature Light
3 color ODT light indicates whether outside air temperature meets
ventilation requirements or if ventilation will be limited due to
temperature or humidity levels.
Optional Appliance Montoring Controls
Appliance
Dial
Appliance Type
Appliance
CFM
Standard Configurations Optional Configuration
#1
Bathroom fan,
HRV/ERV Unit
25-225
Offers balanced ventilation by monitoring
the appliance and takes credit for ventilation
requirement when appliance # 1 fan runs,
preset at 75 CFM
Energy Saving Mode
• Can drive appliance #1 fan in lieu of central fan
• Takes credit for ventilation with damper when heating or cooling
• Drives appliance #1 fanwhen additional ventilation is requires within
the heating/cooling cycle
• Gets energy credit when bathroom fan is used (non ECM central fan
blower)
#2 Bathroom Fan 20-140 Monitors appliance # 2, preset at 75 CFM
#3
Clothes Dryer,
Standard Range Hood
80-400
Passive Make up Air Mode
Opens damper when appliance # 3 is on,
preset at 200 CFM
Active Make up Air Mode
• Turns on central fan and opens damper when appliance # 3 runs
#4
Fireplace,
Commercail Range Hood
100-160 Monitors appliance # 4, preset at 850 CFM
Active Make up Air Mode
• Turns on central fan and opens damper when appliance # 4 runs
Specifications
Model Product Description Voltage Amps Watts
FAV-4 FAVC and FAD Motorized, stainless steel, power open/close in 15 sec. increments, fits 4” duct 24 0.07 3
FAV-5 FAVC and FAD Motorized, stainless steel, power open/close in 15 sec. increments, fits 5” duct 24 0.07 3
FAV-6 FAVC and FAD Motorized, stainless steel, power open/close in 15 sec. increments, fits 6” duct 24 0.07 3
FAV-7 FAVC and FAD Motorized, stainless steel, power open/close in 15 sec. increments, fits 7” duct 24 0.07 3
FAV-8 FAVC and FAD Motorized, stainless steel, power open/close in 15 sec. increments, fits 8” duct 24 0.07 3
FAV-10 FAVC and FAD Motorized, stainless steel, power open/close in 15 sec. increments, fits 10” duct 24 0.07 3
Corporate Oce
Sales/Manufactring/Engineering
Kinston, NC
252.522.3031
West Coast Oce
Distribution/Manufactring
Corona, CA
951-277-0304
Form #4405 2018
fieldcontrols.com