Operator's Manual

Filter Cap
(1/4 turn)
Filter
O-ring
2726
Maintenance
General
Wipe with damp cloth to clean the exterior.
Do not use solvents.
Dust Filter Replacement
Replace the dust (particulate) lter if you notice
slow response times or when it’s visually darker.
Dust Filters: model RFC10
1. Ensure the probe has cooled before opening to avoid contact with
hot gas and liquid that may be within the probe.
2. Rotate the Filter Cap 1/4 turn counter-clockwise to release.
3. Pull out the old Probe Filter and replace if needed.
4. Pull out the O-ring and replace if needed.
5. Replace the Filter Cap.