user manual

Ruinet Utility User Manual
Page 29 of 46
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: [phone] Fax: [phone] Toll_Free: 888-509-1970 email: [e-mail]
2.7. E – Error Messages
The error screen contains messages printed by the FieldServer kernel as well as messages
from many drivers. Starting late in 2002, drivers started sending their messages to the F
Screen.
The error screen is a circular buffer which can hold a limited number of lines of information.
Once full, as each new line is added to the bottom of the buffer, the top line is removed.
Figure 2.12
Figure 2.13
2.8. F – Driver Messages
The F screen is similar to the E-Screen. Newer type drivers send their error or informational
messages to the F screen. In the past all messages were sent to the E screen.
To clear the error screen push the R key. This doesn’t affect the operation of
the FieldServer, drivers or communications to remote devices.
Press V to Display version information.
Other messages – non critical but may
assist in troubleshooting.
Driver Messages – informational only, but may assist in troubleshooting.
To see more push the
PgDn or PgUp keys
System Errors cause the FieldServer to turn on
the red SYS LED on the FieldServer front panel.
Please report all system errors to FieldServer
Technologies.
Turn the LED off by clearing the E-screen with
the R key.
Kernel Messages - informational
messages for FieldServer use,
normall
y
non critical.