user manual

Ruinet Utility User Manual
Page 30 of 46
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: [phone] Fax: [phone] Toll_Free: 888-509-1970 email: [e-mail]
2.9. D – Download Configuration to FieldServer
Figure 2.14
Figure 2.15
2.9.1. Procedure for Downloading a File from a PC to a FieldServer
• From the main menu select “D” to go to the download screen.
• Specify the local file name by selecting “L”, type the file name and press <Enter>
• If the remote filename is incorrect, select “R”, type the file name and press <Enter>.
• Begin the download by selecting “D”.
Press D to enter the file
download screen. Download
means to transfer a file from
your PC to the FieldServer.
Update firmware.
Push the F key and the
file fserver.img will be
downloaded from the
config folder.
Use the O key to enable the downloading of ‘other’ files.
When enabled you can download files other than .csv to
the FieldServer. Please exercise caution with this option.
Path names are allowed when you
type in the local file name. Path
names are not allowed when you type
in the remote file name.