user manual

Ruinet Utility User Manual
Page 41 of 46
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: [phone] Fax: [phone] Toll_Free: 888-509-1970 email: [e-mail]
Appendix B.15. Help -h
Prints a list of command line switches. If this command line switch is used then all others
are ignored.
RuiNet –h
RuiNet prints out all options and exits.
Appendix B.16. Create a Log File -a
Instructs RuiNet to make a log file containing progress information.
RuiNet –lconfig.csv –u0 –alog.txt
RuiNet creates a log file called log.txt on host PC and logs the progress and results of the
config.csv file download to the log file.
The log file contains time and date stamped entries that describe the actions performed by
RuiNet. The log file is used by FieldServer technical support and developers for debugging
purposes. An excerpt from a typical log file is shown below:
07/30/03 20:34:09 Doing rui_send_command with cmd = 182
07/30/03 20:34:09 Rui_version = 41610400
07/30/03 20:34:29 Calling Download_with_repeat (config.csv, config.csv, 1, 0, 0, 1024
07/30/03 20:34:29 Setting tx_rui = 3000
07/30/03 20:34:29 Getting Rui_get_file_size for = config.csv
07/30/03 20:34:29 Restoring tx_rui = 2000
07/30/03 20:34:29 Rui_get_file_size = 4259
Appendix B.17. Version Information -v, -ve
Prints RuiNet version information.
RuiNet –v
RuiNet prints version information and exits.
RuiNet –ve
RuiNet prints extended version information and exits.
Appendix B.18. Skip date and time check on connect -m1
If the system date and time of the machine running RuiNet differs by more than 5 minutes
from that of the FieldServer you will be prompted to update the FieldServer. This behavior
can be overridden using the –m1 switch.
RuiNet –m1
Ensures update FieldServer date and time prompt does not occur.