User Manual-Q1000

The Q1000 is equipped with two DMX interfaces. RJ45 (23) or XLR ports (21&17) are
used to send the DMX signal to the lamphead. Both interfaces include in/out ports for
the purpose of daisy-chaining the DMX line through to the next lamphead.
The Q1000 can be mounted in a standing or hanging position with the Junior Pin
Receiver (7). In order to mount the light, insert the stud of the C-Stand into the
Junior Pin Receiver (7) and secure by tightening the Stand Locking Pin (8). When
mounting in a hanging position, secure the light with a Safety Cable (Not Included).
Insert the PowerCon Cable of the External Power Adapter into the PowerCon
Connection Port (19) and rotate clockwise to lock in place. Plug the light into an
appropriate outlet. The On/Off Button (20) will light red to stand-by
mode. Press the On/Off Button (20) to turn on the Light. The On/Off Button (20) will
light green to working mode.
indicate it is in
indicate it is in
The Q1000 is equipped with a Mini USB port for updating the Q1000's firmware.
Please register your product at www.fiilex.com to be informed when firmware
updates are available.