P180E Portable LED Light User Manual
Table of Contents What’s In The Box 1 Getting To Know The Light 2 Set Up And Basic Operation 4 Optional Accessories 7 Specifications 8 For Your Safety 9
What’s In The Box • P180E Light with Cold Shoe Mount w/ Stud • Power Supply 1 • 4 Leaf Barndoor
Getting To Know The Light D C B A E F G H J I L 2 A 4 Leaf Barndoor B Barndoor Slot C Barndoor Fix Ball D Air Vents E Yoke Knob F Yoke G Light Stand Adapter H Cold Shoe Mount w/ Stud I Light Intensity Knob J CCT Tuning Knob K On/ Off Button L DC Power Input Jack K 3
Set Up And Basic Operation 4 5 1 Mount Light Stand Adapter (G) to 5/8 Stud on Light stand or use Cold Shoe Mount (H) to attach to camera. 2 Insert the AC/DC Power Adapter into the Power Input Jack (L). 6 3 3 Press the On/Off Button (K) to power on the P180E. 4 Adjust the color temperature with the CCT Tuning Knob (J). 2 5 Adjust the brightness with the Light Intensity Knob (I). 7 6 Loosen the Yoke Knob (E) to install optional Rain Guard or Umbrella Holder.
Optional Accessories Fresnel Lens D-tap Cable Dome Diffuser Rain Guard See website for additional accessories. www.fiilex.
Specifications Size (without Barndoor) 2.9” x 2.9” x 3.8” / 74.2 x 74.2 x 98mm Weight (Includes Yoke) 1.
For Your Safety •Do not attempt to disassemble the body of the P180E. •Do not directly cover the side and/or back air vents. Allow for proper air flow. •Use only included power supply or optional D-Tap Cable. Failure to do so may cause damage to the LED light. •Use only a soft, dry towel to gently clean the exterior of light when needed. •Before powering up for the first time, please remove any or all protective membranes from the light. Fiilex.com 1689 Regatta Blvd. Richmond, CA 94804 (510)620-5155 .
