User's Manual

- 8 -
3.8 Play settings
3.8.1 Play mode
The default playback mode is Sequential play. After the current list is played, the song will stop playing. (If
“Play through folders” is ON, it will jump to the next list to continue playing until the last list of songs is played.
Shortly press the confirm button to switch to:
Loop play: The song will play in the list all the time;
Single loop: The song will play the current song all the time (you can also switch other songs manually);
Single play: M3 will stop playing after the current song is played;
Shuffle play: The song will play randomly in the current list.
3.8.2 Resume mode
The default is off. At this moment, after the shutdown and restart in the playback state, the system will enter
the main screen and will not automatically play the song before last shutdown. Shortly press the confirm button
to switch to:
Song: Press the power button to turn off the M3 during playback. After turning it on again, it will automatically
start playing the song played when the previous shutdown, and the song will start playing from the beginning;
Position: Press the power button to turn off the M3 during playback. When it is turned on again, it will
automatically start playing the song played when the previous shutdown, and the song will continue to play from
the progress of the playback.
3.8.3 Playback gap
The default is off. At this moment, the song will be switched according to the system default mode, and the
song will not be processed specially . Shortly press the confirm button to switch to:
Gapless:In the same format, the same sample rate and the same bits depth, when the system automatically
switches songs, the song can be specially seamlessly connected, so that the sound is consistent without
interruption of song switching (some exceptive formats such as MP3 can’t).