User's Manual

Refresh to search Blutooth

2. Bluetooth function

M6 supports virtually all Bluetooth formats including the high-resolution ones for your ultimate

listening pleasure, including: aptX-HD（also backwards compatible with aptX), LDAC and HWA. M6 can

also be a Bluetooth transmitter or a Bluetooth receiver.

Bluetooth transmitter

To use the M6 with new Bluetooth devices (e.g. Bluetooth earphones, speakers, remote controls), the

M6 must first be paired with the device as follows：

1) Tap the Bluetooth in setting as shown in the picture below;

2) If Bluetooth on the M6 is off, turn it on by clicking the switch on the upper right to the “ON”

position on the right;

3) Tap “SEARCH FOR DEVICES” at the bottom of the screen to have the M6 search for and display

nearby Bluetooth devices;

4) Tap the name of your Bluetooth device to pair with it. Successfully paired devices will appear under

the “PAIRED DEVICES” list:

Before connecting Bluetooth device, you can select the Bluetooth audio codec which you want

to use as follows:

1) Enter the Settings-Audio settings interface

2) Click on the Wireless Playback quality, select the one you want to use, then disconnect the current

connection and connect with your Bluetooth device again.