Specification

Revision NA 2
Dated 12/30/2010
Printed on 12/30/2010
Fila Chemicals USA
FILA PS/87
Page n.3 / 5
Exposure Limits
Ingredient OSHA PEL ACGIH TLV Other Exposure Value
Benzyl alcohol
Sodium oleate
1-Propoxy-2-propanol
2-amion-ethanol
None
None
None
3 ppm TWA
:
None
None
None
3 ppm TWA
6 ppm STEL
None
None
None
3 ppm TWA (NIOSH)
6 ppm STEL
Personal Protective Equipment:
Respiratory
None required for adequately ventilated workspaces.
Hands
Use rubber gloves when transferring liquid..
Eyes
Wear safety glasses with side shields or goggles when transferring liquids.
Skin
Wear rubber apron and long sleeve recommended if transferring liquids.
The use of adequate ventilation and mechanical controls must always take priority over the use of personal
protection equipment.
9. Physical and chemical properties
Odor
Pine odor
Appearance
Light yellow liquid
Solubility
Soluble in water
Viscosity
Not available
Vapor density
Not available
Evaporation speed
Not available
Combustible properties
Not available
Partition coefficient: n-octanol/water
Not available
pH
12.7
Boiling point
Not available
Flash point
>142°F (>61°C)
Explosive properties
Not available
Vapor pressure
Not available
Specific gravity
1.01
Solid content:
0.13%
VOC (volatile carbon) :
15.1%
10. Stability and reactivity
Conditions to Avoid
Keep away from flammable materials and strong oxidizers.
Incompatible Materials
Strong oxidizers may ignite the product
Hazardous Decomposition
Products
Not expected to decompose. See section 5 for thermal decomposition
products.
Hazardous Polymerization
Does not occur