Use and Care Manual

Fila Chemicals USA, Corp.
Miami, FL 33172
tel [phone]
[e-mail]
TOLL FREE 1-844-FILA123
Recommended by over
200 INTERNATIONAL TOP BRANDS
manufacturers of materials for floors and wall coverings
usa.filasolutions.com
29
Wet Look Sealer
Water Based
FILAWET
Seals indoor and outdoor unpolished natural stone, terracotta.
Gives the surface a wet-look, gloss finish.
Protects from dirt and stains.
Intensifies the color of unpolished natural stone.
Ideal for use in kitchens, under barbeques, on driveways and in high
traffic areas both indoors and outdoors.
UNPOLISHED NATURAL STONE AND TERRACOTTA
Ready to use, no dilution necessary.
Instructions
: Shake well before using. On a clean, dry surface apply
FILAWET ECO with a flat brush, lambswool applicator or roller. Carefully
rub the product onto the material surface and into the grout joints. Wait 2-3
hours, then apply a second coat. The surface can be walked on after 12
hours.
Caution
: When using the product on surfaces with high porosity (Slate,
Carrara marble, Botticino marble), dilute 1:1. Do not use on polished
surfaces.
Storage temperature: between 41°F and 86°F (5°C and 30°C). Must be
applied at temperatures between 50°F and 86°F (10°C and 30°C).
Eco-friendly: water-based.
Weather resistant.
Is not affected by residual humidity: can be applied 24-48 hours after
initial cleaning.
Very low VOC emissions: contributes towards LEED credits
PROTECTS SURFACES AGAINST STAINS
AND DIRT.
HIGHLY RESISTANT TO UV RAYS AND
HEAVY TRAFFIC.
WHAT IT’S FOR
ADVANTAGES
HOW TO USE IT
Coverage:
1 QT (0.95 L)
Unpolished natural stone, terracotta
› 100-200 sq.ft. (9-19 m
2
)
Coverage rates are indicative and per coat.
Packaging:
1 QT (946 ml) 5 plastic bottles per box