Use and Care Manual

Fila Chemicals USA, Corp.
Miami, FL 33172
tel [phone]
[e-mail]
TOLL FREE 1-844-FILA123
Recommended by over
200 INTERNATIONAL TOP BRANDS
manufacturers of materials for floors and wall coverings
usa.filasolutions.com
26
Stone Enhancer Matte
Finish - Water Based
FILASTONE PLUS
Enriches the color of polished, honed, textured and tumbled natural
stone.
Provides a matte finish that highlights the natural surface character.
Protects the surface from dirt, water and oil stains.
Intensifies the stone’s natural color with a matte finish.
Excellent protection for countertops, inlays and backsplashes.
ALL NATURAL STONE
Instructions: On a clean, dry surface apply FILASTONE PLUS ECO with
a paintbrush, lambswool applicator, sponge or other suitable applicator. Rub
the surface to allow the product to completely penetrate; wipe away any
excess. The surface can be walked on after just 4 hours. For a deeper, more
intense color, apply 2-3 coats; wait at least 4 hours between coats. Remove
any excess residue by rubbing the surface with a cloth soaked in FILASTONE
PLUS ECO. To increase stain protection on unpolished, absorbent stone
apply one coat of FILASTONE PLUS ECO, wait at least 4 hours, then apply a
coat of FILAMP90 ECO PLUS. Caution: Once the surface has been treated
with FILASTONE PLUS ECO, the treatment cannot be reversed; the stone
cannot return to its original state. Before full application, test the product on
a small, inconspicuous area or loose sample to check the effect and color on
the stone. Does not protect marble, limestone and travertine from acid stains.
Apply and leave the product to dry in a well ventilated area. Keep the product
in a cool, dry place.
Storage temperature: between 41°F and 86°F (5°C and 30°C). Must be
applied at temperatures between 50°F and 86°F (10°C and 30°C).
Dual action: seals and enhances surfaces.
Eco-friendly: water-based.
Ideal for indoor and outdoor surfaces.
Does not form a film or yellow over time.
UV and weather resistant.
Long lasting protection.
Certified safe in food preparation areas.
Provides very high coverage rates.
Very low VOC emissions: contributes towards LEED credits. (LEED,
is a certification for the design of green buildings.)
WHAT IT’S FOR
ADVANTAGES
HOW TO USE IT
MATTE, COLOR ENHANCING, ECO-
FRIENDLY PROTECTION.
UV RESISTANT AND NON YELLOWING.
Coverage:
1 QT (0.95 L)
Polished stone › 405 sq.ft. (38 m
2
)
Natural stone › 200-250 sq.ft. (19-24 m
2
)
Coverage rates are indicative and per coat.
Packaging:
0.5 GAL (1.89 L) 4 plastic bottles per box
1 QT (946 ml) 5 plastic bottles per box