Use and Care Manual

25
Recommended by over
200 INTERNATIONAL TOP BRANDS
manufacturers of materials for floors and wall coverings
Fila Chemicals USA, Corp.
Miami, FL 33172
tel [phone]
[e-mail]
TOLL FREE 1-844-FILA123
Protects the surface against grout, construction dirt and mortar stains.
Makes grout cleanup easy.
Reduces grout drying time.
Forms an invisible, protective barrier resistant to moisture and stains
while allowing water vapor to escape.
Ideal for absorbent materials: natural and reconstructed stone, quarry
tile and terracotta.
Ready to use, no dilution necessary.
Make sure the surface to be treated is completely free of dust. Apply
an even coat of PRW200 using a paintbrush or lambswool applicator
pad, avoiding surface pooling. Ensure the product also covers the edges
of the installed material. The surface may be grouted 4 hours after the
application of grout release PRW200. After the grout is cured, clean the
surface with an appropriate cleaner for the material. After cleaning, apply
a protective sealer. The product is not recommended for ceramic tile,
polished porcelain or nonporous materials.
Caution: Before full application, test PRW200 on a small, inconspicuous
area of the surface or loose sample to check for any changes in color. Do
not apply the product outdoors if rain is in the forecast.
Eco-friendly: water-based.
Does not alter the material’s natural color and finish.
Makes post-construction cleaning simple, so that the appropriate
sealer can be easily applied.
VOC free: contributes towards LEED credits.
PFOA free: non carcinogenic.
WHAT IT’S FOR
ADVANTAGES
HOW TO USE IT
Coverage:
1 QT (0.95 L)
Natural stone › 108-215 sq.ft. (10-20 m
2
)
Terracotta › 75-108 sq.ft. (7-10 m
2
)
Coverage rates are indicative and per coat.
Packaging:
1 QT (946 ml) 5 plastic bottles per box
WATER-BASED PROTECTION AGAINST GROUT
AND MORTAR STAINS.
REDUCES DRYING TIME AND EASES GROUT
CLEANUP.
PRW200
ALL ABSORBENT NATURAL STONE, QUARRY TILE, TERRACOTTA
GROUT RELEASE
WATER-BASED
TECHNOLOGY