MSDS

Fila Chemicals USA
Revision nr. 3
Dated 13/4/2015
FILA MP90
Printed on 13/04/2015
Page n. 4/13
SECTION 6. Accidental release measures.
6.1. Personal precautions, protective equipment and emergency procedures.
Block the leakage if there is no hazard.
Wear suitable protective equipment (including personal protective equipment referred to under Section 8 of the safety data sheet) to prevent any
contamination of skin, eyes and personal clothing. These indications apply for both processing staff and those involved in emergency procedures.
6.2. Environmental precautions.
The product must not penetrate into the sewer system or come into contact with surface water or ground water.
6.3. Methods and material for containment and cleaning up.
Collect the leaked product into a suitable container. Evaluate the compatibility of the container to be used, by checking section 10. Absorb the remainder
with inert absorbent material.
Make sure the leakage site is well aired. Check incompatibility for container material in section 7. Contaminated material should be disposed of in
compliance with the provisions set forth in point 13.
6.4. Reference to other sections.
Any information on personal protection and disposal is given in sections 8 and 13.
SECTION 7. Handling and storage.
7.1. Precautions for safe handling.
Keep away from heat, sparks and naked flames; do not smoke or use matches or lighters. Without adequate ventilation, vapours may accumulate at
ground level and, if ignited, catch fire even at a distance, with the danger of backfire. Avoid bunching of electrostatic charges. Do not eat, drink or smoke
during use. Remove any contaminated clothes and personal protective equipment before entering places in which people eat. Avoid leakage of the
product into the environment.
7.2. Conditions for safe storage, including any incompatibilities.
Store only in the original container. Store in a well ventilated place, keep far away from sources of heat, naked flames and sparks and other sources of
ignition. Keep containers away from any incompatible materials, see section 10 for details.
7.3. Specific end use(s).
Information not available.
SECTION 8. Exposure controls/personal protection.