MSDS

Fila Chemicals USA
FILA MP90 ECO PLUS
Revision NA 2
Dated 10/14/2014
Printed on 10/14/2014
Page n.3 / 5
Personal Protective Equipment:
Respirat
ory
If discomfort is experienced in the workplace, wear a facemask covering the nose and
mouth. For high concentrations in the workplace or in the case of an emergency, when
exposure levels are unknown, wear self-contained or air-supplied respiratory protection.
Hands
Protect hands using neoprene, PVC or nitryl gloves.
Eyes
Wear chemical goggles or safety glasses with side shields.
Skin
Wear overalls with long sleeves and safety footwear Wash with soap and water after
removing protective clothing. Wash clothing before reuse.
The use of adequate ventilation and mechanical controls must always take priority over the use of personal
protection equipment.
9. Physical and chemical properties
Odor
Alcohol odor
Appearance
Transparent, yellow liquid
Solubility
Soluble in water
Viscosity
Not available
Vapo
r density
Not available
Evaporation speed
Not available
Combustible
properties
Not available
Partition coefficient: n
-
octanol/water
Not available
pH
9.9
Boiling point
Not available
Flash point
>140°F > (60°C)
Explosive properties
Not available
Vapo
r pressure
Not available
Specific gravity
1.004
Solid content:
4,40 %
VOC (volatile carbon) :
0 %
10. Stability and reactivity
Conditions to Avoid
Keep away from high temperatures.
Incompatib
le Materials
None noted
Hazardous
Decomposition
Products
Not expected to decompose. See section 5 for thermal decomposition
products.
Hazardous Polymerization
Does not occur
11. Toxicological information
Acute
This product has not been tested as a mixture. This product contains ingredients of
relatively low systemic toxicity. Product will irritate the eyes and may irritate the skin.
1-butoxy-2-propanol : LD50 (oral, rat) – 3300 mg/kg LD50 (dermal, rat) - > 2000 mg/kg
Chronic
No effects anticipated