MSDS
Fila Chemicals USA
Revision nr. 4
Dated 4/5/2015
FUGAPROOF
–
FILAGROUT PROOF
Printed on 04/05/2015
Page n. 5/10
Respiratory protection devices must be used if the technical measures adopted are not suitable for restricting the worker's exposure to the threshold
values considered. The protection provided by masks is in any case limited.
If the substance considered is odourless or its olfactory threshold is higher than the corresponding TLV-TWA and in the case of an emergency, wear
open-circuit compressed air breathing apparatus or external air-intake breathing apparatus. For a correct choice of respiratory protection device, see
standard NIOSH 42 CFR 84 and OSHA 29 CFR 1910.134.
ENVIRONMENTAL EXPOSURE CONTROLS.
The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure compliance with
environmental standards.
SECTION 9. Physical and chemical properties.
9.1. Information on basic physical and chemica
l properties.
Appearance
liquid
Colour
Rose colored liquid
Odour
Alcohol like odor
Odour threshold.
Not available.
pH.
4,6
Melting point / freezing point.
Not available.
Initial boiling point.
Not available.
Boiling range.
Not available.
Flash point.
>
199.4ºF (>93 °C)
Evaporation rate
Not available.
Flammability (solid, gas)
Not available.
Lower inflammability limit.
Not available.
Upper inflammability limit.
Not available.
Lower explosive limit.
Not available.
Upper explosive limit.
Not available.
Vapour pressure.
Not available.
Vapour density
Not available.
Relative density.
1,01 Kg/l
Solubility
Readily soluble
Partition coefficient: n-octanol/water
Not available.
Auto-ignition temperature.
Not available.
Decomposition temperature.
Not available.
Viscosity
Not available.
Explosive properties
Not available.
Oxidising properties
Not available.
9.2. Other information.
Solid content: 10%
SECTION 10. Stability and reactivity.
10.1. Reactivity.
There are no particular risks of reaction with other substances in normal conditions of use.
10.2. Chemical stability.
The product is stable in normal conditions of use and storage.
10.3. Possibility of hazardous reactions.