Instructions / Assembly

7
Figure 11
Figure 12
9. INSTALLATING THE
MOUNTING PLATE
Step 1. Remove 1 of the 3 screws from the
mounting ring and loosen the other 2 screws.
(Do not remove)
Step 2. Place the key holes on the mounting
plate over the 2 screws previously loosened
from the mounting ring, turn mounting plate
until it locks in place at the narrow section of
the key holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed. (Fig. 12)
8. ATTACHING THE FAN
BLADES
Step 1. Insert the blade through the slot in the
housing. Align the holes in the blade, the blade
support plate, and the fan motor assembly and
secure with a blade attachment screws with
lock washers. (Fig. 11)
Blade
Slot
Screws with lock
washers
Blade support plate
Mounting ring
Mounting
plate
Screws