Instructions / Assembly

8
Figure 13
LED Light kit
Screws
Light kit
decorative ring
Mounting
Plate
Connection
plugs
10. INSTALLING THE LED
LIGHT KIT & LIGHT KIT
DECORATIVE RING
NOTE: Before starting installation, disconect
the power by turning off the circuit breaker or
removing the fuse at fuse box. Turning power
off using the fan switch is not sufficient to
prevent electric shock.
Step 1. Remove the 1 of 3 screws from the
posts of the mounting plate and keep it for
future use. Loosen the other 2 screws. (Do not
remove) (Fig. 13)
Step 2. While holding the LED light kit under
your fan, make the polarized plug connections:
- Red to white
- Black to black
Step 3. Place the key holes in the LED light kit
over the two screws previously loosened from
the mounting plate. Turn the LED light kit until
the LED light kit locks in place at the narrow
section of the key holes. (Fig. 13)
Step 4. Securely tighten the two light kit
mounting screws previously loosened and the
one previously removed. (Fig. 13)
Step 5. Raise light kit decorative ring up
against the LED light kit, and secure it to fan
by turning light kit decorative ring clockwise
until snug. DO NOT OVERTIGHTEN. (Fig. 13)