User's Manual

Factory default is
OFF status
Usage Methods
◆Modifying the Function of the Key through the DIP Switch Configuration
You may change or stop the use of the key codes by using the DIP switch located at the base of the
keyboard. The factory default values for all are OFF.
When intending to use the DIP switch, please unplug the USB cable, and then turn off the Bluetooth
power. Please note that when the cable and the personal computer are still in connection and the
power is still turned on, this might result in damage or malfunction during operation. Please use a
fine-tip rod to configure the DIP switch.
◆
Switch 6 Power Saving Mode
Under battery powered Bluetooth connection status, if there is no activity for more than 30 minutes, it will automatically switch
to power saving mode to save power consumption. Press any key on the keyboard to deactivate the power saving mode, the
device will automatically resume connection.
Factory default is OFF status
Changes CapsLock key and
left Ctrl key
Swap CapsLock with Esc
Power saving mode ON/OFF
*Page25
US configuration
Mac-specific mode
Switch1 Switch2 Switch3
Switch4 Switch5 Switch6
1
ON
2 3 4 5 6
Switch 5 : Mac-specific mode
The replacement keycaps are provided that are needed when 4 and 5 are set to ON simultaneously. *Page26
Switch 1 : Changes CapsLock key and left Ctrl key
Switch4 : Swap the arrow key on the lower right and set the
arrow key of ｢E/S/D/F｣ key as invalid.
The replacement keycaps are provided that are needed
when 3 and 4 are set to ON simultaneously. *Page26
Switch 2 : Swap CapsLock with Esc
The replacement keycaps are provided that are needed
when 1 and 2 are set to ON simultaneously.
Switch3 : Swap [ | \ ] with Del, and change the downmost
Delete key to [ | \ ] key.
Swap the arrow key on the lower right and
set the arrow key of ｢E/S/D/F｣ key as invalid.
Swap [ | \ ] with Del, and
change the downmost Delete key to [ | \ ] key.
