Instructions / Assembly

Orange Book
OUT FILTER MATE™
SOFTENER CLEANER & SALT
BOOSTER
REV. 2
Page 2 of 6
Effective Date: 7/28/2017
-CONFIDENTIAL -SUMMIT BRANDS 7201 Engle Rd Fort Wayne, IN 800-654-0791
D12
Directions for Use
For Water Softener First Application:
Dissolve 2 cups in 1 quart of warm water. Pour into brine well. Softeners with no brine well,
pour directly into salt storage tank when salt level is low. Manually regenerate softener. Repeat
as needed.
For Preventative Maintenance:
Add 1/2 cup to every 40 lbs of salt added to brine tank. Layer to ensure a continuous dose of
OUT Filter Mate™ Softener Cleaner during each regeneration.
For adjusting pH:
The correct feed rate of OUT Filter Mate™ Softener Cleaner is reached when the pH of the
treated water is between 7.0 and 8.0. Follow procedure for injecting solution into water system
specified by the chemical feed pump manufacturer or supplier.
For Dishwasher:
With machine empty, add 1/2 cup of OUT Filter Mate™ Softener Cleaner instead of soap. Run
normal cycle. Repeat if needed.
For General Purpose Cleaning:
Use 1/2 cup per 1 gallon of warm water. Soak or apply solution to item for 1-5 minutes. OUT
Filter Mate™ Softener Cleaner can also be applied by wetting area and sprinkling the product on
a damp cloth or sponge. Rub gently until stains are gone. Rinse thoroughly. For stubborn stains,
increase strength and/or contact time.