Universal_10-4 Spec Sheet

Technical data and types
Inverter specifications
Electrical specifications / Charger
Regulatory approvals
Charge controller
General specifications
Output power (5 sec) at 25°C 7000 W
41 A
50 / 60 Hz selectable
120 / 240 Vac
True sine wave
94%
<11 W
40 - 68 Vdc
Single / Split phase
4400 W
3800 W
Peak current
Output frequency
Output voltage
Output wave form
Optimal efficiency
Idle consumption search mode
Input DC voltage range
AC connections
45 AOutput current
48 VdcNominal output voltage
24 - 64 VdcOutput voltage range
2 or 3 stageCharge control
Yes - BTS includedCharge temperature compensation
92% Optimal efficiency
> 0.98AC input power factor
12 AInput current
120 / 240 Vac split phaseInput AC voltage
95 - 135 Vac single phase 170 - 270 Vac three phaseInput AC voltage range line to neutral
YesDead battery charge
12, 24, 36, 48, 60 VNominal Battery Voltage
140 VMax. PV Array Voltage (operating)
150 V (including temperature correction factor)Max. PV Array Open-Circuit Voltage
c(CSA) us mark CSA C22.2, No. 107.1-01 UL1741 Ed.2Safety
FCC Part 15 Class BEMC
10 kWh LiFePO
4
(LFP)Battery
Max 2 unitsStackable
27 WTare loss
LFP, FLA, Gel, AGM, CustomCompatible battery types
30 ATransfer relay rating
(AC to inverter and inverter to AC) <1 cycle (16.7 ms)Transfer time
-10°C to 45°C / 14°F to 113°FOptimal operating temperature range
-40°C to 52°C / -40°F to 125°FStorage ambient temperature range
< 95% RH, non condensingHumidity Operation / storage
Indoor only, IP20Ingress protection
AvailableSystem network and remote monitoring
400 lbsWeight (Approximately)
32" (W) x 40" (H) x 13" (D) Dimensions
Output power (30 min) at 25°C
Output power (continuous) at 25°C
Residential storage system - Humless Universal 10|4