FIMI X8 SE 2020 User Manual Please read the user manual carefully before using and keep the manual for future reference.
Contents Services & Support .................................................................................................................................................................... ·1 Product Instruction ....................................................................................................................................................................... ·1 Package List ............................................................................................................
Services & Support Product Instruction FIMI provides X8 SE 2020 users with tutorial videos and The FIMI X8 SE 2020 is an aerodynamic foldable drone equipped with intelligent control, wireless communication and other advanced technology which are necessary to realize functions like long-distance remote control, intelligent flight, precise landing, etc. The built-in 3-axis gimbal stabilizes the camera which is able to shoot 4K video at 30 fps and which performs HD real-time image transmission.
Package List Drone x 1 Charger x 1 Battery x 1 AC cable x 1 FIMI X8 SE 无人机快速入门指南 使用产品前请仔细阅读本快速入门指南，并妥善保管 Remote controller x 1 Instruction x 2 Positive propeller x 3 Reverse propellerx 3 2 USB cable x 3
Product Introduction 1 Drone Positive propeller Power button Battery level lights Landing gear Optical flow camera Reverse propeller Integrated gimbal camera Ultrasonic detecting module Flight status lights Motor 3 Drone tail lights Battery buckle
2 Remote controller Flight mode/auto return Stick storage slot Mobile device holder Battery level lights Record button Shoot button Right stick Left stick Power button Left dial USB port Charging port Cable slot Five-directional button Antenna Auto take-off/land button 4 Right dial
Drone Flight Mode Drone Lights GPS Mode Drone lights To achieve precise hovering, the drone is equipped with a GPS module. The intelligent flight function works in GPS mode. Users can enable Sport Mode or Beginner Mode in the flight settings. When the Beginner Mode is on, the flight speed, flight distance, flight altitude and RTH altitude will be limited.
Safety Protection Failsafe Return Low-power Protection Failsafe return is only supported in GPS mode. When the drone and remote controller signal is interrupted for more than 2 seconds, the flight control system built into the drone will take over the control of your drone, planthe return path according to the original flight path, then the drone will fly back and land at the home point.
Intelligent Flight Auto Take-off Auto Return When the conditions are right, press Auto Take-off/Landing button for 2 seconds to take off. In GPS mode, the drone will take off to an altitude of 4 meters and hover for sticks control. In VPU mode, the drone will take off to an altitude of 1.2 meters and hover for sticks control. When the drone is in flight, the user can toggle the auto return switch to the right to return the drone.
Smart Track In Lock mode, the drone will hover at a place if flight speed is 0, following the target 360°. The user can also adjust flight speed, and the drone will fly around Smart Track is supported only in GPS mode. The user can choose Trace, Profile, or Lock in the App menu. The drone will trace the subject chosen at the App interface at a distance. the target at a certain distance.
Orbit Tap-fly The user can select Orbit mode in the App. when a central point and a radius are set, the drone will fly around the central point at a default speed. If a point of interest is set, the camera will be locked at the POI. The user can select Tap-fly in the App. Tap map to choose a destination and set flight speed, the drone will fly over there at a default speed in a straight line.
Spiral Mode Rocket The user can select Spiral Mode in the App. Set the central point and radius, the drone will spirally fly upward and shoot a video simultaneously, showing a sense of space.
Waypoint Precise Landing Choosing waypoint and drawing route both are available at map. The drone flies along waypoint route at a default speed. If a point of interest is set, the camera will be locked at the POI. The user can select a way to set waypoints, including choosing points in flight or on the map, historial routes. In the process of Return to Home, the optical flow sensor will match landing pad features above the home point.
Assembly and Disassembly Battery 1 Propellers The intelligent battery of FIMI X8 SE 2020 has a capacity of 4500mAh, a voltage of 13.05V. This type of battery employs high energy cell, Unfold the front and rear arms of the drone. advanced battery management system, and charge and discharge Attach the gray marked propellers to the motor mounting base with gray marks on the arms. functionality. Ensure the propeller is pressed to the bottom of the mounting base.
Turning on and off Charging Connect the battery,charger and AC cable as shown below, and plug the charger into a power outlet Short press+long press power button 2 seconds to power on/off Short press to check battery level When the battery is in charge, the battery level lights are flashing When the battery is fully charged, the battery level lights go out It takes about 2 hours to fully charge the battery 13
Gimbal and Camera Camera Drone Micro SD card The camera, equipped with 1/2.6 inch CMOS and wide-angle lens with 26mm equivalent focal distance, supports 4K 30FPS When installing SD card to the drone,please unfold the arms of the drone first and open the interface protection cover HD videos and 12megapixel photos to shoot a blockbuster easier.
Gimbal FIMI X8 SE 2020combines a light weight 3-axis mechanical gimbal Operating Mode with the latest professional control algorithms and ±0.005° control accuracy, which provides a stable shooting platform for camera. The pitch axis, default to tilt from 0°to -90°, can be Follow Mode: adjusted by left dial of remote controller or App.
Remote controller Charge With ergonomic design, it is easier and more precise to control. There is no complicated operation to connect App, just plug . Connect the remote controller to a power adapter as show below in and it works. The remote controller fully charged can work . When the RC is in charge, the battery level lights are flashing about 4.5 hours. . when the RC is fully charged, the battery level lights go out Turning on and off .
Shooting and Recording Assemble Device Tighten the mobile or pad on mobile device holder by extending the holder to the left. Press the shoot button to take a photo. A photo is taken when you hear 2 short sounds. Open the interface protection cover on the RC bottom. Connect your phone and the RC with a USB cable. Press the record button to record video. Recording starts when you hear 2 short sounds. Press again to stop recording with 4 short sounds.
Shortcut Buttons Toggle the auto return button to the right when the drone is in flight, the drone will return to the home point. In the process of auto return, toggle the auto return button to the left, the drone will hover at place and wait for sticks instructions.
Remote Controller Pairing Sticks Control When a new remote controller or drone is replaced, please pair the remote controller and the drone again as shown below： Mode 1 Turn on the drone Forward Up Turn on the RC, long press the power button 15 seconds until hearing constant beep sound，and the power button red light flashes Counterclockwise Clockwise Short press the code pairing button on the drone , the yellow light on the drone Right Left goes out The code pairing succeeds when the power butto
APP 1. Real-time Flight Parameters 28.8m: vertical flight altitude from the home point 32.8m: horizontal distance from the home point Download and install Fimi Navi 2020 app, register a FIMI user VS1.23m/s: vertical speed account before login, and select FIMI X8 SE 2020 to enter device HS1.80m/s: horizontal speed : Estimated landing battery : Estimated RTH battery Image Interface 2.
4. Map Interface ：Media library, tap to download or preview videos and photos saved in Micro SD card Show the drone real-time location and support 3D zoom. Tap to switch with image interface. 8 Intelligent Flight 5. Metering Mode Tap to enter intelligent flight interface tap any place in the image interface for metering, when appearing exposure lock button, click to lock the value. ：Auto Take-off ：Auto Landing 6.
Prepare to Fly Map Interface Check Before Taking off Make sure that the battery of the aircraft and remote controller is sufficient. Make sure that the propeller is properly installed and free from damage and aging. Make sure that the camera lens is clean. Make sure that the SD card is inserted. Keep antennas crossed as shown in the figure.
Confirm the drone heading Manual take off The direction of integrated gimbal camera is the drone heading. Once the drone is turned on, the heading can be told by navigation lights. The red light and the green light indicate the heading,and the yellow light is the tail.
Manual take landing Flying Condition Requirement 1. The drone is suitable for people above 18 years who have full civil capacity. 2. Make sure to keep some distance from people, animals, trees, vehicles and buildings while using the drone. Please be careful when someone approaches. Slowly move the left stick downward to land the drone Once the drone has landed, push and hold the left stick down over 5 seconds, the motors will stop Left stick 3.
Maintenance and Calibration Gimbal Calibration Remote Controller Calibration Please try to calibrate the remote controller when you detect Click "gimbal calibration" and enter the calibration page in the gimbal settings menu. inconsistencies between stick control and drone flying. Select "RC Calibration" in the remote controller menu After the drone is placed smoothly, click to start calibration.
Battery Maintenance Firmware Upgrade Do not throw the battery into fire; Do not batter the battery; Please check the firmware version regularly, new version will Lithium battery's capacity reduces significantly in low temperature be pushed by Fimi Navi App to prompt users to update. conditions. Do not use the battery when it is below 5 degrees. Please download new firmware when the App is connected Do not place the battery under the burning sun.
Basic Specification Drone Remote controller Gimbal Product model：FWWRJ03A6 Net weight：About 373g Controllable rotation range：0°~ -90°（Pitch） Dimensions：204×106×72.6mm Dimensions：203.8×91×46.6mm Angular vibration range：± 0.005° Diagonal size：372mm Operating frequency：5.725-5.850GHz Lens：FOV 80° Take off weight：About 765g Type：Rechargeable lithium battery Camera aperture：f2.0 Flight time：About 35min* Capacity：3900mAh Camera focal distance：3.54mm Max ascending speed：5m/s Nominal voltage：3.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
