Quick Start Guide

Step 3
11
1. Attach the CL Runner (O) to the Left Upright Partition (7) with three M3.5x16MM
Screws (E) and tighten with a screwdriver or electric screwdriver (not Supplied).
Note:
Use the CL mark on the CL Runner (O) to correctly attach to the Left Upright Partition
(7) as shown below.
2. Attach the CR Runner (O) to the Right Upright Partition (8) with three M3.5x16MM
Screws (E) and tighten with a screwdriver (not supplied).
Note:
Use the CR mark on the CR Runner (O) to correctly attach to the Right Upright
Partition (8) as shown below.
E
x 6
O
x 1
CR
CL
E
E
CL
CR
CL CR
7 8