Data Sheet
3
I
Relays for automatic control of lighting
according to ambient light level - with
separate light sensor
11.31 - 1 NO 16A output contact
• Sensitivity adjustment from 1 to 100lux
• One module, 17.5mm wide
• Low energy consumption
• 24VDC/AC supply version available
11.41 - 1 CO 16A output contact
• European patent “zero hysteresis” for energy
saving
• Italian patent “Light feedback compensation”
principle
• Selector with 4 positions:
- Standard range (threshold setting 1…80lx)
- High range (threshold setting 30…1000lx)
- continuous light (helpful during installation
and initial testing and for maintenance
purposes)
- light off (useful for vacations)
• For the first 3 working cycles the delay time
(On and Off) is reduced to zero in order to aid
installation
• LED status indication
• SELV separation between contact and supply
circuit
• Double insulation between supply and light
sensor
• 35mm rail (EN60715) mount
• Cadmium free contact material
• Cadmium free light sensor (IC photo diode)
11.31 11.41
• 1 pole
• 17.5mm wide
• 1 pole
• “zero hysteresis”
• 4 position selector
For outline drawing see page 10
Contact specification
Contact configuration 1 NO (SPST-NO) 1 CO (SPDT)
Rated current/Maximum peak current A 16/30 (120 A - 5ms) 16/30 (120 A - 5ms)
Rated voltage/
Maximum switching voltage VAC 250/400 250/400
Rated load AC1 VA 4000 4000
Rated load AC15 (230VAC) VA 750 750
Nominal lamp rating:
2000 2000230V incandescent/halogen W
fluorescent tubes with
electronic ballast W 1000 1000
fluorescent tubes with
electromechanical ballast W 750 750
CFL W 400 400
230V LED W 400 400
LV halogen or LED with
electronic ballast W 400 400
LV halogen or LED with
electromechanical ballast W 800 800
Minimum switching load mW (V/mA) 1000 (10/10) 1000 (10/10)
Standard contact material AgSnO
2
AgSnO
2
Supply specification
Nominal voltage (U
N
) VAC (50/60Hz) 12…24 110…230 230
DC 12…24 — —
Rated power VA (50Hz)/W 2.5/0.9 5.2/2
Operating range VAC (50Hz) 10.2…28.8 90…265 (0.8…1.1)U
N
DC 10.2…32 — —
Technical data
Electrical life at rated load in AC1 cycles 100·10
3
100·10
3
Threshold setting: Standard range lx 1…100 1…80
High range lx — 30…1000
Hysteresis (switching Off/On ratio) 1.25 1
Delay time: switching On/Off s 15/30 15/30
Ambient temperature range °C –20…+50 –20…+50
Protection category:
light dependent relay/light sensor IP 20/IP 54 IP 20/IP 54
Approvals (according to type)
II-2018,www.findernet.com
11
SERIES
11 SERIES
Light dependent relays 12 - 16A