Datasheet

ManualsBrandsFINDER ManualsRelaysRelay DPST-NO - IP20

22.32.0.xxx.1xx0 22.32.0.xxx.4xx0

2 NO, 3 mm * (or 1 NO + 1 NC or 2 NC)

25 / 80 25 / 120

250 / 440 250 / 440

6,250 6,250

10 10

1,800 1,800

—10

— 2,000

— 200

— 800

— 500

25/5/1 25/5/1

1,000 (10 / 10) 1,000 (10 / 10)

AgNi AgSnO

12 - 24 - 48 - 60 - 120 - 230 12 - 24 - 48 - 60 - 120 - 230

2 /2.2 2 / 2.2

(0.8 …1.1) U

0.4 U

0.1 U

2 · 10

70 · 10

30 · 10

30 / 20 30 / 20

–20…+50 –20…+50

IP20 IP20

Contact specification

Contact configuration

Rated current/Maximum peak current A

Rated voltage V AC

Rated load AC1 / AC-7a (per pole @ 250 V) VA

Rated current AC3 / AC-7b A

Rated load AC15 (per pole @ 230 V) VA

Single-phase motor rating (230 V AC) kW

Rated current AC-7c A

230 V lamps rating: incandescent or halogen W

compact fluorescent (CFL) W

electronic ballast fluorescent tubes W

electromagnetic ballast compens. fluorescent tubes W

Breaking capacity DC1: 30/110/220 V A

Minimum switching load mW (V/mA)

Contact material

Coil specification

Nominal voltage (U

) V DC/AC (50/60 Hz)

Rated power AC/DC VA (50 Hz)/W

Operating range DC/AC (50/60 Hz)

Holding voltage DC/AC (50/60 Hz)

Must drop-out voltage DC/AC (50/60 Hz)

Technical data

Mechanical life AC/DC cycles

Electrical life at rated load AC-7a cycles

Operate/release time ms

Insulation between coil and contacts (1.2/50 μs)

Ambient temperature range °C

Protection category

Approvals (according to type)

• AgNi contacts, specifically

intended for resistive and

slightly inductive loads as

well as for motor loads

• AgSnO

contacts, specifically

intended for lamp loads and

for high inrush current loads

Features

25 A modular contactor - 2 pole

• 17.5 mm wide

• NO contact gap ≥ 3 mm, double break

• Continuous duty for the coil and contacts

• AC/DC silent coil (with varistor protection)

• Protective separation (reinforced insulation)

between coil and contacts

• Mechanical and LED indicators as standard

• Auto-On-Off selector version available

• AgNi and AgSnO

contact versions available

• Compliant with EN 61095: 2009

• Auxiliary contact module available,

quick-assembly with the main contactor

(1 NO + 1 NC and 2 NO versions)

• 35 mm rail (EN 60715) mount

22 Series - Modular contactors 25 A

22.32...1xx0 / 22.32...4xx0

Screw terminal

* Contact gap ≥ 3 mm for NO contacts only;

NC contacts ≥ 1.5 mm

For outline drawings see page 7

2 NO 1 NO + 1 NC 2 NC

(x3x0) (x5x0) (x4x0)

II-2013, www.findernet.com

Summary of content (10 pages)

PAGE 1
22 Series - Modular contactors 25 A Features 22.32.0.xxx.1xx0 22.32.0.xxx.4xx0 25 A modular contactor - 2 pole 17.
PAGE 2
2 Series - Modular contactors 25 A Features 22.34.0.xxx.1xx0 22.34.0.xxx.
PAGE 3
22 Series - Modular contactors 25 A Ordering information Exemple: 22 series, modular contactor 25 A, 4 NO contacts, coil 230 V AC/DC, AgSnO2 contacts, Auto-On-Off selector + mechanical indicator + LED. 2 2 . 3 A B C D 4 . 0 . 2 3 0 .
PAGE 4
22 Series - Modular contactors 25 A Technical data Insulation Rated insulation voltage V AC Pollution degree 250 440 3* 2 Insulation between coil and contact set Type of insulation Reinforced Overvoltage category III Rated impulse voltage kV (1.2/50 μs) Dielectric strength V AC 6 4,000 Insulation between adjacent contacts Type of insulation Basic Overvoltage category III Rated impulse voltage kV (1.
PAGE 5
22 Series - Modular contactors 25 A Contact specification Ratings and utilization categories according to EN 61095: 2009 Utilization Typical Load Rated category applications characteristics current (A) Rated Rated electrical life (cycles) operational 2-pole 2-pole 4-pole 4-pole voltage AgNi contacts AgSnO2 contacts AgNi contacts AgSnO2 contacts (V) (22.32...1xx0) (22.32...4xx0) (22.34...1xx0) (22.34...
PAGE 6
22 Series - Modular contactors 25 A Wiring diagrams Type 22.32 Line only switched Type 22.34 Type 22.34 II-2013, www.findernet.
PAGE 7
22 Series - Modular contactors 25 A Outline drawings Type 22.32 Screw terminal Type 22.32 + 022.33 / 022.35 Screw terminal Type 22.34 Screw terminal Type 22.34 + 022.33 / 022.35 Screw terminal II-2013, www.findernet.com Type 022.33 / 022.
PAGE 8
22 Series - Modular contactors 25 A Auxiliary module 022.33 / 022.35 22.32 + 022.33 / 022.35 022.33 022.35 22.34 + 022.33 / 022.35 Contact specification Contact configuration Conventional free air thermal current Ith Rated current AC15 (230 V) Electrical life at rated load A VA cycles Contact material 2 NO 1 NO + 1 NC 6 6 700 700 3 30 x 10 30 x 103 AgNi AgNi Short circuit protection Rated conditional short circuit current Back-up fuse kA A 6 (gL/gG type) mm2 1 x 4 / 2 x 2.
PAGE 9
22 Series - Modular contactors 25 A Accessories Adaptor for panel mounting (for 22.32 type), plastic, 17.5 mm wide 020.01 Adaptor for panel mounting (for 22.34 type), plastic, 35 mm wide 011.01 Sheet of marker tags, plastic, 72 tags, 6x12 mm 060.72 Identification tag, plastic, 1 tag, 17x25.5 mm 019.01 Separator for rail mounting, plastic, 3 mm wide 020.03 8-way jumper link for types 22.32, 17.5 mm wide 022.18 (blue) Rated values 10 A - 250 V 020.01 011.01 060.72 019.
PAGE 10