Electronic step, call/reset and monostable relays W/C Call and reset switches for bathrooms Bathrooms lighting control Bedroom light control Living room light control 13 SЕRIES Office lighting control
FINDER reserves the right to alter characteristics at any time without notice. FINDER assumes no liability for damage to persons or property, caused as a result of the incorrect use or application of its products.
13 SERIES Electronic step relays 10 - 16 A 13 SERIES 13.81 - Electronic step relay - Rail mount - 1 Pole 13.81 13.91 13.91 - Electronic step relay and timing step relay Switch box mount - 1 Pole • Fixed time (10 minutes) timing function selectable (13.
13 SERIES 13 SERIES Electronic step/monostable relays 16 A 13.01 13.01 - Electronic step/monostable relay Rail mount - 1 Pole 13.61.0.024.0000 13.61.8.230.0000 13.61 - Multifunction step/monostable relay with reset command - Rail mount 1 Pole • Selectable Step or Monostable operation (13.01) • Multifunction (Step, Timing step, Monostable, Light ON) (13.61) • Reset feature, for centralized off command (13.61) • Set feature, for centralized on command (13.61.0.
13 SERIES Electronic call/reset relays and monostable relays 8 - 12 A 13.11 - Call & Reset Relay - Rail mount - 1 Pole 13.11 13 SERIES 13.12 13.31 13.12 - Call & Reset Relay - Rail mount - 2 Pole 13.31 - Electromechanical monostable relay Switch box mount - 1 Pole • Call relay with reset command suitable for residential and commercial applications: public bathroom, hospital, hotel (type 13.11/13.
13 SERIES Electronic step/monostable and call/reset 13 SERIES Ordering information Example: 13 series, electronic step/monostable relay, 35 mm rail (EN 60715) mount, 1 CO (SPDT) 16 A contact, 230 V AC supply. 1 3 . 0 A B C D 1 . 8 . 2 3 0 . 0 0 0 0 Series A: Contact material 0 = Standard 4 = Standard AgSnO2 (only for 13.31) B: Contact circuit 0 = Standard 3 = Standard NO (only for 13.
13 SERIES Electronic step/monostable and call/reset 13 SERIES Functions Type 13.01 Monostable On closure of a switch between terminals (B2-B3) the output contact will close, and remain so, until the switch opens. Step relay (bistable) After every impulse (B1-B2), the output contact changes state alternately switching from open to closed and vice versa. 13.11 13.12 Call and Reset relay On momentary closure of the Set switch (S), the output contact closes.
13 SERIES 13 SERIES Electronic step/monostable and call/reset Functions Type 13.61.8.230 Functions (RM) Monostable On closure of a switch between terminal 3 and Line (or Neutral, in case of 3-wire connection) the output contact will close, and remain so, until the switch opens. (IT) Timing step relay On initial impulse the output contact closes and timing starts for the pre-set duration T; On expiry of the time delay, the output contact opens.
13 SERIES Electronic step/monostable and call/reset 13 SERIES Wiring diagrams (13.01, 13.11, 13.12 and 13.31) Type 13.01 Step wiring diagram Type 13.01 Monostable wiring diagram Red LED indication: Continuous = relay ON Red LED indication: Continuous = relay ON Type 13.11 Call & reset relay Type 13.12 Call & reset relay Reset Reset Set Set Type 13.31 Connection XI-2017, www.findernet.
13 SERIES 13 SERIES Electronic step/monostable and call/reset Wiring diagrams (13.61) Type 13.61.8.230 3 wire connection Red LED indication: Continuous = relay ON Blinking = relay OFF Type 13.61.8.230 4 wire connection Red LED indication: Continuous = relay ON Blinking = relay OFF Reset Reset Max 10 (≤ 1 mA) illuminated push buttons Type 13.61.0.
13 SERIES Electronic step relays 13 SERIES Wiring diagrams (13.81 and 13.91) Type 13.81 3 wire connection Red LED indication: Continuous = relay ON Blinking = relay OFF Type 13.81 4 wire connection Red LED indication: Continuous = relay ON Blinking = relay OFF L N Max 15 (≤ 1 mA) illuminated push buttons Type 13.91 3 wire connection Max 15 (≤ 1 mA) illuminated push buttons Type 13.91 4 wire connection Max 12 (≤ 1 mA) illuminated push buttons Max 12 (≤ 1 mA) illuminated push buttons XI-2017, www.
13 SERIES 13 SERIES Electronic step relays Outline drawings 13.11 Screw terminal 45 56.5 84 4.3 30.5 88.8 17.5 33.8 13.01 Screw terminal 13.12 Screw terminal 13.31/13.91 Screw terminal 13.61 Screw terminal 13.81 Screw terminal XI-2017, www.findernet.
SERIES Electronic step relays 13 SERIES Accessories Adaptor for panel mounting, for type 13.01, 35 mm wide 011.01 Adaptor for panel mounting, for type 13.11, 13.12, 13.61 and 13.81, 17.5 mm wide 020.01 Sheet of marker tags (CEMBRE Thermal transfer printers) for relays types 13.11, 13.12, 13.61 and 13.81 (48 tags), 6 x 12 mm 060.48 011.01 020.01 060.48 XI-2017, www.findernet.