Dimmers Kitchen light control Bedroom light control Living room light control Lighting control in corridors (for hotels, offices and hospitals) 15 SЕRIES
FINDER reserves the right to alter characteristics at any time without notice. FINDER assumes no liability for damage to persons or property, caused as a result of the incorrect use or application of its products.
15 15 SERIES Dimmers III-2021, www.findernet.com “Master + Slave” system for dimming multiple lighting loads of either single or mixed lamp technologies SERIES 15.10 15.11 Type 15.10 “Master“ - accepts input from a controlling push-button and outputs a dimming signal to a maximum of 32 x 15.
15 SERIES 15 SERIES Dimmers Electronic dimmers for lamps of various technologies. All compatible with the direct drive of Incandescent/halogen lamps and 230 V dimmable LED lamps (Other lamps/drivers according to Type) Type 15.91 - Mountable in wall box - Leading edge dimming - Linear dimming - Automatically adjusts for supply frequency Type 15.51 - Wall box or panel mount - Trailing edge dimming - Step or linear dimming - Separate models for 50 and 60 Hz Type 15.
15 15 SERIES YESLY Dimmers SERIES 15.21.8.230.B300 YESLY Bluetooth Dimmers 230 V Type 15.21.8.230.B300 - Round wall box (ie: 0 60mm) mounting Type 15.
15 SERIES 15 SERIES YESLY Dimmers 15.21.9.024.B200 PWM Dimmer for LED strip Bluetooth YESLY Type 15.21.9.024.
15 15 SERIES KNX Universal Dimmer - 2 channel SERIES 15.2K.8.230.
15 SERIES 15 SERIES Dimmers Ordering information Example: type 15.71, YESLY Bluetooth dimmer, 230 V AC. 1 5 . 7 1 . 8 . 2 3 0 . B Series Type 1 = Master / slave, 35 mm rail (EN 60715) mount, 17.5 mm wide 2 = Round wall box mounting 2 = Mounting on 35 mm rail (EN 60715), with 2 outputs (15.2K) 5 = Panel or wall box mount 7 = YESLY - wall mounting residential switch boxes like AVE, Bticino, Gewiss, Simon-Urmet, Vimar 8 = 35 mm rail (EN 60715) mount, 17.
15 15 SERIES Dimmers SERIES Technical data EMC specifications Reference standard contact discharge EN 61000-4-2 Type of test Electrostatic discharge air discharge EN 61000-4-2 Radiated electromagnetic field Fast transients (burst) (5-50 ns, 5 and 100 kHz) (80…1000 MHz) EN 61000-4-3 15.2K 4 kV 4 kV 4 kV 8 kV 8 kV 8 kV 10 V/m 3 V/m 3 V/m 10 V/m 4 kV 4 kV on pushbutton connection EN 61000-4-4 4 kV 4 kV — differential mode EN 61000-4-5 2 kV 2 kV 2.
15 SERIES 15 SERIES Dimmers Types 15.10 and 15.11 Signaling LED (15.10 only) Condition LED (15.11 only) Condition Stand-by, output voltage < 1 V Stand-by, input voltage < 1 V Active, output voltage ≥ 1 V Active, input voltage ≥ 1 V Timing, staircase function Short circuit or overload, output disabled Overtemperature, output disabled Functions Type Linear dimming Operating mode without memory: at switch-off, the light level is not memorized.
15 15 SERIES Dimmers SERIES Type 15.51 and 15.91 Functions Type Step dimming Operating mode 1 (with memory): the previous light level is memorized. Long control pulse: The light level is progressively raised or lowered through a maximum of 10 incremental steps. Short control pulse: Alternately switches between On and Off. When switching On, the light level assumes the value set during the previous On state. 15.51…0400 Operating mode 2 (without memory): on switch off, the light level is not memorized.
15 SERIES 15 SERIES Dimmers Type 15.81 Thermal protection and signaling LED (15.81 type only) Supply voltage Thermal protection OFF — ON — ON ALARM ALARM The internal thermal protection (active on all dimmer types) will detect an unsafe temperature, due to overload or incorrect installation, and will turn the dimmer output off.
15 15 SERIES Dimmers SERIES Dimming methods Phase cutting: Leading edge dimming Trailing edge dimming Light dimming is realized with “phase cutting technology”, which works by “cutting off” part of the mains voltage waveform in order to reduce the RMS voltage fed to the lamp. When the “cut off” part is at the beginning of each half cycle the dimming method is called Leading Edge. When it is towards the end of each half cycle, it is called Trailing Edge.
15 SERIES 15 SERIES YESLY Dimmers Types 15.21 and 15.71 (BLE only) Dimmer setting The dimming function can be set via Finder TOOLBOX App, available for iOS and Adroid systems. This product is ready-to-use with the factory setting: 1 – LEDRC1; Trailing edge linear control curve. Functions Settable via App.
15 SERIES Dimmers SERIES Wiring diagrams - Types 15.10 and 15.11 0 - 10 V -Yout +Yout -Yin +Yin 0 -10V -Yin +Yin 0 -10V -Yin +Yin 0-10V -Yin +Yin 0-10V 0-10V M 5”(10’) Dimming speed ON/ALLARM (ϑ PROT.) (BP:T) 1”(0.5”) 15.10.8.230.0010 Master Dimmer UN 230V~(50-60Hz) 14 MASTER ON/ALLARM (ϑ PROT.) Minimum + − Minimum + − + − 15.11.8.230.0400 Slave Dimmer UN 230V~(50-60Hz) 15.11.8.230.0400 Slave Dimmer UN 230V~(50-60Hz) 15.11.8.230.0400 Slave Dimmer UN 230V~(50-60Hz) 15.
15 SERIES 15 SERIES Dimmers Wiring diagrams - Types 15.51, 15.71, 15.81 and 15.91 Note: remember to maintain a ground/earth connection for class 1 light fittings. Type 15.51 - 3 wire connection Type 15.51 - 4 wire connection L L N N Type 15.91 - 3 wire connection Type 15.91 - 4 wire connection L L N N Type 15.81 - 3 wire connection Type 15.81 - 4 wire connection L L N N I Type 15.71 - 4 wire connection L III-2021, www.findernet.
15 15 SERIES Dimmers SERIES Wiring diagram - Type 15.21 Type 15.21.8.230.xxxx - 4 wire connection Type 15.21.9.024.B200 L N IN 0 + OUT + P1 A2 A1 H2 H1 12...24V DC POWER SUPPLY L N Wiring diagram - Type 15.2K Type 15.2K L N Outline drawings Type 15.2K Screw terminal III-2021, www.findernet.
15 SERIES 15 SERIES Dimmers Outline drawings Type 15.51 Screw terminal Type 15.91 Screw terminal Type 15.10 Screw terminal Type 15.11 Screw terminal Type 15.81 Screw terminal I Type 15.21 Screw terminal III-2021, www.findernet.com Type 15.
15 15 SERIES Dimmers SERIES Accessories Adaptor for panel mounting for types 15.10, 15.11 and 15.81, plastic, 17.5 mm wide 020.01 Separator for rail mounting, plastic, 9 mm wide for types 15.10, 15.11 and 15.81 022.09 Sheet of marker tags for types 15.10, 15.11 and 15.81, plastic, 48 tags, 6 x 12 mm 060.48 8-way jumper link for type 15.10 and 15.11 connection, 17.5 mm wide Rated values 022.18 (blue) 10 A - 250 V Leakage current suppression module.