Data Sheet

FINDER TOOLBOX
2
15.21
EN 60669-1/EN 60669-2-1
15.21.9.024.B200
U
N
12…24 V DC
U
min
10.8 V DC
U
max
26.4 V DC
P 192 W @ 24 V DC
96 W @ 12 V DC
Strip LED
12-24 V DC
(–10…+50)°C
1
Utility Model - IB15219B200VXX - 06/20 - Finder S.p.A. con unico socio - 10040 ALMESE (TO) - ITALY
0P1A2A1H2H1
+ +
IN OUT
0.5 Nm
9mm
(1x2.5/2x1.5) mm
2
(1x14/2x16) AWG
9mm
(1x2.5/2x1) mm
2
(1x14/2x16) AWG
ENGLISH
15.21.9.024.B200 BLUETOOTH DIMMER FOR LED STRIP
WIRING DIAGRAM
FINDER TOOLBOX - With the Finder Toolbox App you can:
- Adjust the driving frequency of the lamp (from 250 Hz to 1000 Hz )
Default value = 250 Hz
- Associate the wireless buttons
- Set the scenario transition time
- Set the Memory function
- Set the Restore after Blackout function
- Adjust the minimum dimming level
NOTE
- Without memory function: each ON command results in the full
brightness level being established
- With memory function: at switch OFF the brightness level is memorised
and with the subsequent ON command this level is restored
- Short pulse command:
switches alternately between ON and OFF status
- Long pulse command:
the light level will increase or decrease progressively, either linearly
- Transmission range:
approximately 10 m in free space and without obstacles
- The transmission range may vary depending on the building structure
Example:
- Reinforced concrete walls and/or metal walls
- Partition walls lled with insulating wool on a metallic backing
- Ceilings with metal or carbon ber panels
- Lead glass or glass with metal cladding, steel furniture
- Device protected against over-temperature, overload, Short Circuit
and Polarity Reversal
1
2