Datasheet

ManualsBrandsFinder ManualsActive ComponentsFinder 18.31.8.230.0031 1 pc(s)

II-2016, www.findernet.com

SERIES

18 SERIES

PIR movement detectors 10A

PIR movement detectors for internal or

external installations - wall mounting

Type 18.01

- Internal installation

- Surface mounting

Type 18.11

- External installation (IP54)

- Surface mounting

Type 18.A1

- External mounting (IP55)

- Terminal for PE connection

- Push-in terminals

• Output contact connected to supply live

• Small size

• Adjustable ambient light intervention threshold

• Adjustable Light ON Time

• Universal mounting position - permits the

selection of any area for survey

• Wide angle of survey

18.01/18.11

Screw terminal

18.A1

Push-in terminal

NOTE: with 110…125VAC supply, the Ratings

(AC1, AC15 and lamp loads) specified in pages

1 to 4 must be reduced by 50%

(e.g. 500W instead of 1000W)

18.01 18.11 18.A1

• 1 NO 10A

• Internal installations

• 1 NO 10A

• External installations

• Protection category IP54

• 1 NO 10A

• External installations

• Protection category IP55

• PE terminal

• Push-in terminals

For outline drawings see page 11

Contact specification

Number of contacts 1 NO (SPST-NO) 1 NO (SPST-NO) 1 NO (SPST-NO)

Rated current/Maximum peak current A 10/20 (100A - 5ms) 10/20 (100A - 5ms) 10/20 (100A - 5ms)

Rated voltage/

Maximum switching voltage VAC 230/230 230/230 230/230

Rated load AC1 VA 2300 2300 2300

Rated load AC15 (230V) VA 450 450 450

Nominal lamp rating 230V:

incandescent/halogen W

1000 1000 1000

fluorescent lamp with

electronic ballast W 500 500 500

fluorescent lamp with

electromecanical ballast W 350 350 350

CFL W 300 300 300

LED 230V W 300 300 300

halogen or LV LED with

electronic ballast W 300 300 300

halogen or LV LED with

electromechanical ballast W 500 500 500

Standard contact material AgSnO

AgSnO

Supply specification

Coil specification VAC (50/60Hz) 120…230 120…230 110…230

DC — — —

Rated power AC/DC VA (50Hz)/W 2.5/— 2.5/— 2/0.8

Operating range VAC (50/60Hz) 96…253 96…253 96…253

DC — — —

Technical data

Electrical life at rated load AC1 cycles 100·10

100·10

Ambient light intervention threshold lx 5…350 5…350 5…1000

Light ON time after last detection 10s…12min 10s…12min 10s…20min

Sensing area diameter See diagram page 8 See diagram page 8 See diagram page 8

Ambient temperature range °C –10…+50 –30…+50 –30…+50

Protection category IP 40 IP 54 IP 55

Approvals (according to type)

Summary of content (12 pages)

PAGE 1
8 SERIES PIR movement detectors 10 A 18 SERIES PIR movement detectors for internal or external installations - wall mounting Type 18.01 --Internal installation --Surface mounting Type 18.11 --External installation (IP54) --Surface mounting Type 18.
PAGE 2
18 SERIES 18 SERIES PIR movement detectors 10 A PIR movement detectors for internal installations - ceiling mount Type 18.21 --Surface mounting Type 18.31 --Recess mounting Type 18.31-0031 --High ceiling type (6 meter max.) --Surface or recess mounting • Output contact connected to supply live • Small size • Adjustable ambient light intervention threshold • Adjustable Light ON Time • Wide angle of survey 18.21 • 1 NO 10 A • Surface mounting 18.31 • 1 NO 10 A • Recess mounting 18.
PAGE 3
18 SERIES PIR movement detectors 10 A 18 SERIES PIR movement detectors for internal installations, with volt-free output contact Type 18.21-0300 --Surface mounting Type 18.31-0300 --Recess mounting • Applications where interface to PLC or BMS is required • Ceiling mounting • Small size • Adjustable ambient light intervention threshold • Adjustable Light ON Time • Wide angle of survey 18.21…0300/18.31…0300 Screw terminal 18.21-0300 • 1 NO 10 A • Surface mounting 18.
PAGE 4
18 SERIES 18 SERIES PIR movement and presence detectors 10 A Movement and presence detectors with Push-in terminals For internal installation Type 18.51 --Standard version --Volt-free output contact Type 18.
PAGE 5
18 SERIES PIR movement detectors 10 A 18 SERIES Movement detectors with Push-in terminals For internal installation - with volt-free output contact Type 18.41 --Corridor (ceiling) installation Type 18.61 --Wall mount installation • Extensive sensing area up to 120 m2 • Modern design • Quick installation thanks to push-in terminals • 1 NO contact 10 A, with “zero crossing” switching • Wall mounting compatible with 60 mm box and 2 or 3 module box • Double terminals for easy “looping” in and out 18.41 18.
PAGE 6
18 SERIES PIR movement and presence detectors 10 A 18 SERIES Ordering information Example: 18 series, PIR movement detector for internal installations, wall mounting, 1 NO 10 A contact, 120…230 V AC supply. 1 8 . 0 1 . 8 . 2 3 0 .
PAGE 7
18 SERIES PIR movement and presence detectors 10 A 18 SERIES Wiring diagram Type 18.01/18.11 Type 18.21/18.31/18.31…0031 L L N N N Type 18.21-0300/18.31-0300 L 2 2 1 1 2 1 1 = ambient light intervention threshold 2 = light ON time following last detection Type 18.41 Type 18.51 L N 1 2 3 Type 18.
PAGE 8
18 SERIES 18 SERIES PIR movement and presence detectors 10 A Wiring diagram Type 18.01/18.11 Type 18.01/18.21 Type 18.21/18.31/18.31…0031 L L L N N N Note: Observe the polarity indicated for Phase and Neutral Special functions (18.51…0040) External push-button Lux Movement A control pulse on the push-button inverts the status of the output relay, until the timing after the last movement detected is elapsed.
PAGE 9
18 SERIES PIR movement and presence detectors 10 A 18 SERIES Sensing area 18.01, 18.11, 18.A1 - Wall mounting Side view 18.01, 18.11 - Ceiling mounting Plan view 18.21, 18.31 - Ceiling mounting 18.31…0031 - Internal ceiling installation, surface mounting 18.31…0031 - High ceilings installations Movement and presence detector 18.41 18.51 For applications with high ceilings (up to 6 meters) 18.61 J II-2016, www.findernet.com Accessories Beam limiter (supplied with the type 18.
PAGE 10
18 SERIES 18 SERIES PIR movement and presence detectors 10 A Outline drawings Type Suspended ceiling mounting Recess mounting Surface mounting 18.21 18.31 43.6 18.41 31.6 18.31…0031 18.51 J II-2016, www.findernet.com 18.
PAGE 11
18 SERIES PIR movement and presence detectors 10 A 18 SERIES Outline drawings Type 18.01 Type 18.11 Type 18.A1 II-2016, www.findernet.
PAGE 12
18 SERIES 18 SERIES PIR movement and presence detectors 10 A Main features for 18.41, 18.51, 18.61 and 18.A1 Push-in terminals The push-in terminals permit the quick connection of solid wires or ferrules by their simple insertion into the terminal (A). It is possible to open the terminal to extract the wire by first pushing down on the push-button using a screwdriver or fingers (C).