Data Sheet

5
X-2017, www.findernet.com
J
18
SERIES
18 SERIES
PIR movement detectors 10A
PIR movement detectors for internal
installations, with volt-free output contact
Type 18.21-0300
- Surface mounting
Type 18.31-0300
- Recess mounting
Applications where interface to PLC or BMS is
required
Ceiling mounting
Small size
Adjustable ambient light intervention threshold
Adjustable Light ON Time
Wide angle of survey
18.21…0300/18.31…0300
Screw terminal
NOTE: with 110…125VAC supply, the Ratings
(AC1, AC15 and lamp loads) must be reduced by
50% (e.g. 500W instead of 1000W)
18.21-0300 18.31-0300
1 NO 10A
Surface mounting
1 NO 10A
Recess mounting
For outline drawings see page 16
Contact specification
Number of contacts 1 NO (SPST-NO) 1 NO (SPST-NO)
Rated current/Maximum peak current A 10/20 (100A - 5ms) 10/20 (100A - 5ms)
Rated voltage/
Maximum switching voltage VAC 250/400 250/400
Rated load AC1 VA 2500 2500
Rated load AC15 (230V) VA 450 450
Nominal lamp rating 230V:
incandescent/halogen W 1000 1000
fluorescent lamp with
electronic ballast W 500 500
fluorescent lamp with
electromecanical ballast W 350 350
CFL W 300 300
LED 230V W 300 300
halogen or LV LED with
electronic ballast W 300 300
halogen or LV LED with
electromechanical ballast W 500 500
Standard contact material AgSnO
2
AgSnO
2
Supply specification
Coil specification VAC (50/60Hz) 120…230 120…230
VAC (50/60Hz)/DC 24 24
Rated power AC/DC VA (50Hz)/W 2/1 2/1
Operating range VAC (50/60Hz) 96…253 96…253
VAC (50/60Hz)/DC 19.2…26.4 19.2…26.4
Technical data
Electrical life at rated load AC1 cycles 100·10
3
100·10
3
Ambient light intervention threshold lx 5…350 5…350
Light ON time after last detection 10s…12min 10s…12min
Sensing area diameter See diagram page 15 See diagram page 15
Ambient temperature range °C –10…+50 –10…+50
Protection category IP 40 IP 40
Approvals (according to type)