9 SЕRIES Relay actuators & Status indicating modules Panels for electrical distribution
FINDER reserves the right to alter characteristics at any time without notice. FINDER assumes no liability for damage to persons or property, caused as a result of the incorrect use or application of its products.
19 SERIES Relay actuators & Status indicating modules 19 SERIES 19.21.0.024.0000 Auto/Off/On output module 10 A • Auto/Off/On output module intended to permit the automatic control of pumps, blowers or motor groups. Or, in the case of installation, maintenance or failure, to permit the load equipment to be turned “Off“ or turned “On“ • Ideal interface for PLC and electronic systems • Only 11.
19 SERIES 19 SERIES Relay actuators & Status indicating modules 19.50.0.024.0000 Analogue override module - Auto/Hand (0…10)V • Analogue output module intended to provide, by the selection switch on the front panel, a (0…10)V output, automatically or by hand. • With the selector switch in position “A“ (Automatic) the (0…10)V signal is derived from the controller.
19 SERIES Relay actuators & Status indicating modules 19 SERIES 19.91.9.0xx.4000 Power relay module 16 A • Suitable for Lamps load • AgSnO2 contacts for heavy duty, high inrush current loads • DC supply (12 or 24 V) • LED indicator • Reinforced insulation between supply and contacts B • Cadmium Free contacts • 35 mm rail (EN 60715) mounting • 1 Pole changeover contact • 17.
19 SERIES 19 SERIES Relay actuators & Status indicating modules Switching actuator with KNX technology - 16 A 19.6K.9.030.
19 SERIES Relay actuators & Status indicating modules 19 SERIES Ordering information Example: 19 series Auto/Off/On override module, 1 CO (SPDT) 10 A contact, 24 V AC/DC supply. 1 9 . 2 1 . 0 . 0 2 4 . 0 0 Series 0 0 Contact circuit 0 = Standard 3 = NO (19.6K) Type 21 = Auto/Off/On output module, 11.2 mm 50 = Analogue override module (0…10)V 91 = Power relay module 6K = KNX actuator, 6 poles 16 A B Contact material 0 = Standard for 19.21, 19.50 4 = Standard for 19.91, 19.
19 SERIES 19 SERIES Relay actuators & Status indicating modules Wiring diagrams - Application examples Type 19.21 B Controller, PLC Type 19.21 End process Type 19.50 Input analog signal Output analog signal Controller, PLC Type 19.50 End process In selector position A (Automatic) the (0…10)V controller variable is transferred via Yin - A2 and Yout to the end process. In selector position H (Hand) the (0…10)V value set by the regulator is transferred via Yout to the end process.
19 SERIES Relay actuators & Status indicating modules 19 SERIES Outline drawings Type 19.21 Screw terminal Type 19.50 Screw terminal B Type 19.6K Screw terminal X-2017, www.findernet.com Type 19.
19 SERIES 19 SERIES Relay actuators & Status indicating modules Accessories 060.48 Identification tag, for 19.50 types, plastic, 1 tag, 17 x 25.5 mm 019.01 Adaptor for panel mounting, for 19.21/50/91 types, plastic, 17.5 mm wide 020.01 060.48 019.01 020.01 X-2017, www.findernet.com B Sheet of marker tags (CEMBRE Thermal transfer printers) for 19.
19 SERIES Relay actuators & Status indicating modules 19 SERIES Application notes Intervention Modules The demand for security apparatus, heating, air conditioning or efficient energy use in offices, hotels, and private homes or in industrial space is growing constantly, leading to the installation of increasingly complex electronic systems.
