Operation Manual

ManualsBrandsFinder ManualsAir Conditioning1C.71-7

IB1C71 - 08/11

1C.71

www.findernet.com

TECHNICAL DATA

. . . . . . . . . . . . 1

DISPLAY LEGEND

. . . . . . . . . . . . 2

BASIC SETTINGS

. . . . . . . . .

. 3/4

MANUAL TEMPERATURE

SETTING

. . . . . . . . . . . . . . . . . . . . 5

SETTING THE 3

TEMPERATURE LEVELS

. . . . . . 6

PROGRAMMING

. . . . . . . . . . . . . 7

PARTY FUNCTION

. . . . . . . . . . . . 8

VACATION PROGRAM

. . . . . . . . 9

PROGRAM REVIEW AND

COPY PROGRAMMING

. . . . . . 10

FROST PROTECTION

FUNCTION . . . . . . . . . .

. . . . . . . 11

ADVANCED SETTINGS . . . . .

12/13

DISPLAY LOCK

. . . . . . . . . . . . . . 14

BATTERY

. . . . . . . . . . . . . . . . . . 15

fig. 1

fig. 2

fig. 3

TOUCH SCREEN

WEEKLY PROGRAMMABLE

CHRONOTHERMOSTAT

Summary of content (6 pages)

PAGE 1
fig. 1 www.findernet.com Í 1C.71 TOUCH SCREEN WEEKLY PROGRAMMABLE CHRONOTHERMOSTAT fig. 2 TECHNICAL DATA . . . . . . . . . . . . 1 DISPLAY LEGEND . . . . . . . . . . . . 2 BASIC SETTINGS . . . . . . . . . . 3/4 MANUAL TEMPERATURE SETTING . . . . . . . . . . . . . . . . . . . . 5 SETTING THE 3 TEMPERATURE LEVELS . . . . . . 6 L PROGRAMMING . . . . . . . . . . . . . 7 N PARTY FUNCTION . . . . . . . . . . . . 8 VACATION PROGRAM . . . . . . . . 9 fig. 3 PROGRAM REVIEW AND COPY PROGRAMMING . . . . . .
PAGE 2
TECHNICAL DATA POWER SUPPLY: 2 ALKALINE BATTERIES 1.5 V AAA TEMPERATURE RANGE: (+5…+37)°C FROST PROTECTION TEMPERATURE RANGE: (+2…+8)°C TEMPERATURE DIFFERENTIAL: (0.1...0.9)°C selectable MINIMUM PROGRAMMING INTERVAL: 1 hour DEGREE OF PROTECTION: IP20 OUTPUT: RELAY CONTACT RATING: 5 A 250 V AC MOUNTING: TO THE WALL DISPLAY LEGEND °C T OK OFF BASIC SETTINGS It is possible to set or change the parameters below, following the insertion of the batteries, or after pressing PRG key for >2 sec.
PAGE 3
MANUAL TEMPERATURE SETTING Successive presses to the key toggles the thermostat between Timed mode and Manual mode. On entering Manual mode the display initially shows the manual set-temperature which, if required, can be modified using the keys. If the keys are not pressed, or 2 seconds after being pressed, the display will change to the actual room temperature and the thermostat remains in the manual mode.
PAGE 4
PROGRAMMING Press PRG key to enter programming menu. Selecting the day(s) to be programmed Starting with day 1 (Monday) blinking, move down each day in turn by using the key. OK 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 2 3 4 5 6 7 During this process select using the OK key those day(s) required to have the same time/temperature profile. (Day(s) so selected will now appear on a black background).
PAGE 5
PROGRAM REVIEW AND COPY PROGRAMMING Program Review Press PRG and use keys to step through and view the program for each day, in turn. Use to return to main screen. OK 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 2 3 4 5 6 7 Copy Programming Press PRG ; using the keys, select the day to be copied and press OK to confirm. Then move using keys, to day(s) requiring programming, selecting with OK . The day(s) concerned will then have a black background.
PAGE 6
Dat Setting: set one of the Dat codes using the keys and Dat 0: allows day of the week and day number to be reassigned. Dat 1: sets automatic update of daylight saving time. Dat 2: sets no automatic update of daylight saving time. 8A E 1 OK OK DISPLAY LOCK DISPLAY LOCK (easy) Press the key for 2 seconds, and 3 beeps will confirm that the display is locked (except that touching the displayed temperature will change it to the current time for a few seconds).