Operation Manual

11
From the main screen, press .
The manual mode temperature value set previously is displayed.
To modify the setting, press to increase or to decrease the value.
Press to exit this mode.
NOTE
The current temperature reading is displayed if there is no user input for 3
seconds.
This function locks the display to prevent accidental changes to the settings
caused by unintentionally touching the screen.
Press and hold the button
to activate the function.
The icon appears on the display and the unit sounds 3 beeps to confirm
activation.
Press and hold for 3 seconds to deactivate the function
NOTE
The PIN set in the advanced LOCK menu must be
for the DISPLAY
LOCK function to be available (see page 28)
MANUAL SETTINGS
DISPLAY LOCK