Operation Manual

15
Press
PRG
to access the programming menu.
PROGRAMMING DAY / S
The day value 1(Monday) flashes.
Press or to change the day selection.
Select the desired day/s (e.g. 2, 3 and 4) with
OK
.
The selected days are highlighted against a black background.
Press on the profile to programme hours/temperatures.
PROGRAMMING INDIVIDUAL HOURLY SETPOINT TEMPERATURES FOR
24 HOUR PERIOD
The HOUR bar 0 flashes on the hours/temperature graph.
Use
and to select the temperature level.
Press
OK
to confirm and move to the next hour.
Repeat the same procedure for each hour.
NOTE Press to go back to the previous setting.
Press and hold the button for 3 seconds to exit programming mode and
save all settings confirmed previously by pressing
OK
.
PROGRAMMING