Operation Manual

NOTE
When the thermostat is automatically anticipating/shortening activation
times (relative to the programmed hour period), the symbol is displayed
in the main menu.
NOTE
When the E2 function is activated, the thermostat takes a few days to
monitor ambient conditions before the function is fully effective.
9 - DELAYED START
This function is used to delay start by 30 minutes after the programmed hour
period.
The following screen is displayed after the ENERGY SAVING E2 menu:
Press one of the two arrow keys to enable the function, and press
OK
to confirm.
To exit the advanced menu, press
OK
repeatedly or press
S
E
T
until the
unit sounds three beeps confirming that the modification has been saved.
The thermostat is now off.
Press to switch the thermostat on, and configure the settings as
indicated on page 22.
30