Datasheet

4 NO 3 NO + 1 NC 2 NO + 2 NC
(4310) (4710) (4610)
3
VI-2014, www.findernet.com
22.44.0.xxx.4xx0 22.64.0.xxx.4xx0
• For high inrush current loads
176 A
• Contact material AgSnO
2
•
Specifically intended:
for high inrush current loads
240 A
• Contact material AgSnO
2
40 - 63 A modular contactor - 4 pole
• NO and NC contact gap ≥ 3 mm, double break
• Continuous duty for the coil and contacts
• AC/DC silent coil (with varistor protection)
• Protective separation (reinforced insulation)
between coil and contacts
• Mechanical indicator as standard
• AgSnO
2
contacts
• Compliant with EN 61095: 2009 and with
EN 60947-4-1: 2009
• 35 mm rail (EN 60715) mount
22.44.../22.64...
Screw terminal
For outline drawings see page 8
Features
4 NO, (or 3NO + 1NC or 2NO + 2NC) ≥ 3 mm
40 / 176 63 / 240
250 / 440 250 / 440
16,000 24,000
22 30
——
11 15
20 32
——
4,000 5,000
1,000 1,500
1,500 2,000
1,500 2,000
40/4/1.2 63/4/1.2
1,000 (17/50) 1,000 (17/50)
AgSnO
2
AgSnO
2
12 - 24 - 110...120 (110 V DC) - 230...240 (220 V DC)
55
(0.85…1.1) U
N
(0.85…1.1) U
N
0.85 U
N
0.85 U
N
0.2 U
N
0.2 U
N
3 · 10
6
3 · 10
6
100 · 10
3
100 · 10
3
20 / 45 20 / 45
66
–5…+55 –5…+55
IP20 IP20
Contact specification
Contact configuration
Rated current/Maximum peak current A
Rated voltage V AC
Rated load AC1 / AC-7a (per pole @ 250 V) VA
Rated current AC3 / AC-7b (400 V) A
Rated load AC15 (per pole @ 230 V) VA
Three-phase motor rating (400 - 440 V AC) kW
Rated load AC5a (per pole @ 250 V) A
Rated current AC-7c A
230 V lamps rating: incandescent or halogen W
compact fluorescent (CFL) or LED W
electronic ballast fluorescent tubes W
electromagnetic ballast compens. fluorescent tubes W
Breaking capacity DC1: 30/110/220 V A
Minimum switching load mW (V/mA)
Contact material
Coil specification
Nominal voltage (U
N
) V DC/AC (50/60 Hz)
Rated power AC/DC VA (50 Hz)/W
Operating range DC/AC (50/60 Hz)
Holding voltage DC/AC (50/60 Hz)
Must drop-out voltage DC/AC (50/60 Hz)
Technical data
Mechanical life AC/DC cycles
Electrical life at rated load AC-7a cycles
Operate/release time ms
Insulation between coil and contacts (1.2/50 μs) kV
Ambient temperature range °C
Protection category
Approvals (according to type)
22 Series - Modular contactors 25 - 40 - 63 A
22
SERIES
L