Datasheet

ManualsBrandsFINDER ManualsSolid State RelaysSolid-State-Print relays Series 34 SERIE 34 EL.-LASTRELAIS 24 VDC

IV-2017, www.findernet.com

SERIES

34 SERIES

Slim electromechanical PCB relays 6A

Ultra-slim 1 Pole - 6A relay

Printed circuit mount

- direct or via PCB socket

35mm rail mount

- via screw, screwless or push-in terminal

sockets

• 1 Pole changeover contacts or

1 Pole normally open contact

• Ultra slim (5mm), package

• Sensitive DC coil - 170mW (Dual AC/DC coil

drive possible using 93 series sockets)

• UL Listing (certain relay/socket combinations)

• Cadmium Free contact materials

• 8/8mm clearance/creepage distance

• 6kV (1.2/50μs) insulation, coil-contacts

34.51 34.51-5010

• 5 mm wide

• Low coil power

• PCB or 93 series sockets

• 5 mm wide

• Low coil power

• PCB or 93 series sockets

• Contact AgNi + Au

Copper side view Copper side view

For UL ratings see:

“General technical information” page V

For outline drawing see page 7

Contact specification

Contact configuration 1 CO (SPDT) 1 CO (SPDT)

Rated current/

Maximum peak current A 6/10 6/10

Rated voltage/

Maximum switching voltage VAC 250/400 250/400

Rated load AC1 VA 1500 1500

Rated load AC15 (230VAC) VA 300 300

Single phase motor rating (230VAC) kW 0.185 0.185

Breaking capacity DC1: 30/110/220V A 6/0.2/0.12 6/0.2/0.12

Minimum switching load mW (V/mA) 500 (12/10) 50 (5/2)

Standard contact material AgNi AgNi + Au

Coil specification

Nominal voltage (U

) VAC (50/60Hz) — —

VDC 5 - 12 - 24 - 48 - 60 5 - 12 - 24 - 48 - 60

Rated power AC/DC VA (50Hz)/W —/0.17 —/0.17

Operating range AC — —

DC (0.7…1.5)U

(0.7…1.5)U

Holding voltage AC/DC —/0.4U

—/0.4U

Must drop-out voltage AC/DC —/0.05U

—/0.05U

Technical data

Mechanical life AC/DC cycles —/10·10

—/10·10

Electrical life at rated load AC1 cycles 60·10

60·10

Operate/release time ms 5/3 5/3

Insulation between coil

and contacts (1.2/50µs) kV 6 (8mm) 6 (8mm)

Dielectric strength

between open contacts VAC 1000 1000

Ambient temperature range °C –40…+85 –40…+85

Environmental protection RT II RT II

Approvals (according to type)

Summary of content (12 pages)

PAGE 1
34 SERIES Slim electromechanical PCB relays 6 A 34 SERIES 34.51 Ultra-slim 1 Pole - 6 A relay 34.
PAGE 2
34 SERIES 34 SERIES Slim solid state PCB relays (SSR) 0.1 - 6 A 34.81.7.xxx.
PAGE 3
4 SERIES Slim solid state PCB relays (SSR) 0.1 - 6 A 34 SERIES 34.81.7.xxx.7048 Ultra-slim Solid State Relays 34.81.7.xxx.7220 Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in terminal sockets A • Single circuit output switching options • • • • • • - 0.1 A, 48 V DC - 0.
PAGE 4
34 SERIES 34 SERIES Ultra-Slim PCB relays Ordering information Electromechanical relay (EMR) Example: 34 series slim electromechanical relay, 1 CO (SPDT) 6 A contacts, 24 V sensitive DC coil. 3 4 . 5 A B C D 1 . 7 . 0 2 4 . 0 0 1 0 Series A: Contact material 0 = Standard AgNi 4 = AgSnO2 5=A gNi + Au Type 5 = Electromechanical type No.
PAGE 5
34 SERIES Ultra-Slim PCB relays 34 SERIES Electromechanical relay Technical data A Insulation according to EN 61810-1 Nominal voltage of supply system V AC 230/400 Rated insulation voltage V AC 250 Pollution degree 400 3 2 Insulation between coil and contact set Type of insulation Reinforced Overvoltage category III Rated impulse voltage kV (1.
PAGE 6
34 SERIES Ultra-Slim PCB relays 34 SERIES Solid state relay Technical data Insulation Between input and output EMC specifications Electrostatic discharge Dielectric strength 3000 V AC contact discharge air discharge Radiated electromagnetic field (80…1000 MHz) Fast transients on supply terminals (burst 5/50 ns, 5 and 100 kHz) common mode Voltage pulses on supply terminals (surge 1.2/50 μs) differential mode Radio-frequency common mode voltage (0.
PAGE 7
34 SERIES Ultra-Slim PCB relays 34 SERIES Outline drawings Type 34.51 Type 34.81 IV-2017, www.findernet.
PAGE 8
34 SERIES 93 SERIES Sockets and accessories for 34 series relays A 93.61 Screw terminal socket 35 mm rail mounting (EN 60715) Common features - Space saving 6.2 mm wide - Connections for 16-way jumper link - Integral coil indication and protection circuit - Secure retention and easy ejection by plastic clip - Dual screw head (blade+cross) terminals For technical data and supply versions, refer to the MasterINTERFACE 39 Series – “Relay interface module” Electromechanical Relay - EMR Supply voltage 93.
PAGE 9
3 SERIES Sockets and accessories for 34 series relays 93.60 34 SERIES Push-In terminal socket 35 mm rail mounting (EN 60715) Common features - Space saving 6.2 mm wide - Connections for 16-way jumper link - Terminal doubler 093.62 - Integral coil indication and protection circuit - Secure retention and easy ejection by plastic clip A For technical data and supply versions, refer to the MasterINTERFACE 39 Series – “Relay interface module” Electromechanical Relay - EMR Supply voltage 93.65 93.
PAGE 10
34 SERIES 93 SERIES Sockets and accessories for 34 series relays Screw less terminal socket 35 mm rail mounting (EN 60715) Common features - Space saving 6.2 mm wide - Connections for 20-way jumper link - Integral coil indication and protection circuit - Secure retention and easy ejection by plastic clip A 93.
PAGE 11
93 SERIES Sockets and accessories for 34 series relays 93.11 Approvals (according to type): PCB socket with retaining and release clip For relay type Technical data Rated values Dielectric strength Protection category Ambient temperature °C 34 SERIES 93.11 (blue) 34.51, 34.81 A 6 A - 250 V ≥ 6 kV (1.2/50 μs) between coil and contacts IP 20 –40…+70 IV-2017, www.findernet.
PAGE 12