Data Sheet

ManualsBrandsFinder ManualsElectromechanics40.51.9.012.0000 PCB relay 12 V DC 10 A 1 change-over 1 pc(s)

1 & 2 Pole relay range

40.31 - 1 Pole 10A (3.5mm pin pitch)

40.51 - 1 Pole 10A (5mm pin pitch)

40.52 - 2 Pole 8A (5mm pin pitch)

PCB mount

- direct or via PCB socket

35mm rail mount

- via screw and screwless sockets

• DC coils (standard or sensitive) & AC coils

• Cadmium Free contact material

• 8mm, 6kV (1.2/50µs) isolation, coil-contacts

• UL Listing (certain relay/socket combinations)

• Flux proof: RTII standard, (RTIII option)

• 95 series sockets

• Coil EMC suppression

• Timer accessories 86 series

40.31 40.51 40.52

• 3.5mm contact pin pitch

• 1 Pole 10A

• PCB or 95 series sockets

• 5mm contact pin pitch

• 1 Pole 10A

• PCB or 95 series sockets

• 5mm contact pin pitch

• 2 Pole 8A

• PCB or 95 series sockets

Copper side view

Pin length 5.3mm for

PCB or sockets

Copper side view

Pin length 5.3 mm for

PCB or sockets

Copper side view

Pin length 5.3 mm for

PCB or sockets

For UL ratings see:

“General technical information” page V

For outline drawing see page 10

Contact specification

Contact configuration 1 CO (SPDT) 1 CO (SPDT) 2 CO (DPDT)

Rated current/Maximum peak current A 10/20 10/20 8/15

Rated voltage/

Maximum switching voltage VAC 250/400 250/400 250/400

Rated load AC1 VA 2500 2500 2000

Rated load AC15 (230VAC) VA 500 500 400

Single phase motor rating (230VAC) kW 0.37 0.37 0.3

Breaking capacity DC1: 30/110/220V A 10/0.3/0.12 10/0.3/0.12 8/0.3/0.12

Minimum switching load mW (V/mA) 300 (5/5) 300 (5/5) 300 (5/5)

Standard contact material AgNi AgNi AgNi

Coil specification

Nominal voltage (U

) VAC (50/60Hz) 6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240

VDC

5 - 6 - 7 - 9 - 12 - 14 - 18 - 21 - 24 - 28 - 36 - 48 - 60 - 90 - 110 - 125

Rated power AC/DC/sens. DC VA (50Hz)/W/W

1.2/0.65/0.5 1.2/0.65/0.5 1.2/0.65/0.5

Operating range AC (0.8…1.1)U

(0.8…1.1)U

DC/sens. DC (0.73…1.5)U

/(0.73…1.5)U

(0.73…1.5)U

/(0.73…1.5)U

(0.73…1.5)U

/(0.73…1.5)U

Holding voltage AC/DC 0.8

/0.4

0.8

/0.4

0.8

/0.4

Must drop-out voltage AC/DC 0.2

/0.1

0.2

/0.1

0.2

/0.1

Technical data

Mechanical life cycles 10·10

10·10

Electrical life at rated load AC1 cycles 200·10

200·10

100·10

Operate/release time ms 7/3 - (12/4 sensitive) 7/3 - (12/4 sensitive) 7/3 - (12/4 sensitive)

Insulation between coil

and contacts (1.2/50µs) kV 6 (8 mm) 6 (8 mm) 6 (8 mm)

Dielectric strength

between open contacts VAC 1000 1000 1000

Ambient temperature range °C –40…+85 –40…+85 –40…+85

Environmental protection RT II** RT II** RT II**

Approvals (according to type)

** See general technical information “Guidelines for automatic flow solder processes” page II.

VI-2015, www.findernet.com

SERIES

40 Series - Miniature PCB/Plug-in relays 8 - 10 - 12 - 16 A

Summary of content (18 pages)

PAGE 1
40 40 Series - Miniature PCB/Plug-in relays 8 - 10 - 12 - 16 A 40.31 1 & 2 Pole relay range 40.31 - 1 Pole 10 A (3.5 mm pin pitch) 40.51 - 1 Pole 10 A (5 mm pin pitch) 40.52 - 2 Pole 8 A (5 mm pin pitch) 40.51 SERIES 40.52 A PCB mount - direct or via PCB socket 35 mm rail mount - via screw and screwless sockets • DC coils (standard or sensitive) & AC coils • Cadmium Free contact material • 8 mm, 6 kV (1.
PAGE 2
40 SERIES 40 Series - Miniature PCB/Plug-in relays 8 - 10 - 12 - 16 A 40.61 40.61 - 1 Pole 16 A (5 mm pin pitch) 40.xx.6 - Bistable versions of the 40.31, 40.51, 40.52 & 40.61 relays PCB mount - direct or via PCB socket 35 mm rail mount - via screw and screwless sockets • DC coils & AC coils • Cadmium Free option available • 8 mm, 6 kV (1.2/50 µs) isolation, coil-contacts • UL Listing • 5 mm contact pin pitch • 1 Pole 16 A • PCB or 95 series sockets (certain 40.
PAGE 3
40 40 Series - Miniature PCB/Plug-in relays 8 - 10 - 12 - 16 A 40.31 1 Pole relay range 40.31 - 1 Pole 12 A (3.5 mm pin pitch) 40.61 - 1 Pole 16 A (5 mm pin pitch) SERIES 40.61 • Pin length 3.5 mm for PCB mount • Pin length 5.3 mm as Plug-in relay • DC standard (0.65 W) or sensitive (0.5 W) coils A available • Cadmium Free contact material available • 6 kV (1.2/50 μs) isolation coil-contacts • 8 mm creepage and clearance distances between coil and contacts • 3.
PAGE 4
0 SERIES 40 Series - Miniature PCB/Plug-in relays 8 - 10 - 12 - 16 A 40.11 1 Pole relay range - 1 Pole 10 A (Flat pack) • DC coils • Cadmium Free option available • 8 mm, 6 kV (1.2/50 µs) isolation, coil-contacts • 1 Pole 10 A • Flat pack • PCB mount For UL ratings see: “General technical information” page V Copper side view For outline drawing see page 10 Pin length 3.
PAGE 5
40 SERIES 40 Series - Miniature PCB/Plug-in relays 8 - 10 - 12 - 16 A Ordering information Example: 40 series PCB relay, 2 CO (DPDT), 230 V AC coil. 4 0 . 5 A B C D 2 . 8 . 2 3 0 . 0 0 0 0 A: Contact material See table below Series Type 1 = PCB - 3.5 mm pinning, flat 3 = PCB/Plug-in - 3.
PAGE 6
40 SERIES 40 Series - Miniature PCB/Plug-in relays 8 - 10 - 12 - 16 A Technical data Insulation according to EN 61810-1 1 pole Nominal voltage of supply system V AC 230/400 Rated insulation voltage V AC 250 Pollution degree 3 2 pole 230/400 400 250 400 2 3 2 Insulation between coil and contact set Type of insulation Reinforced (8 mm) Reinforced (8 mm) III III kV (1.
PAGE 7
40 40 Series - Miniature PCB/Plug-in relays 8 - 10 - 12 - 16 A SERIES Contact specification F 40 - Electrical life (AC) v contact current Types 40.31/51/61 F 40 - Electrical life (AC) v contact current Types 40.52 limit for 40.31/51 **Inductive load - AC15 Cycles Cycles Resistive load - cosϕ = 1 Inductive load - cosϕ = 0.4 A Resistive load - cosϕ = 1 Inductive load - cosϕ = 0.4 *limit for 40.31 * limit for 40.31, see page 3 ** Inductive load - AC15 for 40.
PAGE 8
40 SERIES 40 Series - Miniature PCB/Plug-in relays 8 - 10 - 12 - 16 A Coil specifications DC coil data - 0.5 W sensitive (types 40.31/51/52/61) Nominal Coil Operating range Resistance Rated coil voltage code consumption Umin Umax R I at UN UN V V V mA Ω 5 7.005 3.7 7.5 50 100 6 7.006 4.4 9 75 80 7 7.007 5.1 10.5 100 70 9 7.009 6.6 13.5 160 56 12 7.012 8.8 18 288 42 14 7.014 10.2 21 400 35 18 7.018 13.2 27 650 27.7 21 7.021 15.4 31.5 900 23.4 24 7.024 17.5 36 1150 21 28 7.028 20.5 42 1600 17.5 36 7.
PAGE 9
40 40 Series - Miniature PCB/Plug-in relays 8 - 10 - 12 - 16 A SERIES Contact specification R 40 - DC coil operating range v ambient temperature Standard coil R 40 - DC coil operating range v ambient temperature Sensitive coil, types 40.31/51/52/61 A 40.61 40.31/51/52 R 40 - DC coil operating range v ambient temperature Sensitive coil, type 40.11 R 40 - AC coil operating range v ambient temperature 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. 1 - Max.
PAGE 10
40 SERIES 40 Series - Miniature PCB/Plug-in relays 8 - 10 - 12 - 16 A Outline drawings Type 40.31/51/52/61 Type 40.31/61 Type 40.11 A VI-2015, www.findernet.com * (3.5 or 5.
PAGE 11
40 95 Series - Socket overview for 40 series relays Module Socket Relay Description 99.02 95.03 40.31 95.05 40.51 40.52 40.61 Screw terminal (Box clamp) socket Panel or 35 mm rail --Top terminals - Contacts (EN 60715) mount --Bottom terminals - Coil 95.05 Mounting See page 12 SERIES Accessories --Coil indication and EMC suppression modules A --Jumper link --Timer modules --Plastic retaining and release clip Module Socket 99.80 Relay 95.83.3 40.31 95.85.3 40.51 40.52 40.
PAGE 12
40 SERIES 95 Series - Sockets and accessories for 40 series relays A 95.05 Approvals (according to type): ertain relay/socket C combinations Screw terminal (Box clamp) socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip Plastic retaining and release clip (supplied with socket - packaging code SPA) 8-way jumper link Identification tag Modules (see table below) Timer modules (see table below) Sheet of marker tags for retaining and release clip 095.
PAGE 13
40 SERIES 95 Series - Sockets and accessories for 40 series relays Screw terminal (Box clamp) socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip Plastic retaining and release clip (supplied with socket - packaging code SPA) 8-way jumper link Identification tag Modules (see table below) Sheet of marker tags for retaining and release clip 095.91.3 plastic, 72 tags, 6 x 12 mm Technical data Rated values Dielectric strength Protection category Ambient temperature °C 95.85.
PAGE 14
40 SERIES 95 Series - Sockets and accessories for 40 series relays Screw (Box clamp) terminal socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip Plastic retaining and release clip 8-way jumper link Identification tag Modules (see table below) Sheet of marker tags for retaining and release clip 095.91.3 plastic, 72 tags, 6 x 12 mm Technical data Rated values Dielectric strength Protection category Ambient temperature °C A 95.95.
PAGE 15
40 95 Series - Sockets and accessories for 40 series relays 95.55 Approvals (according to type): 095.91.3 Screwless terminal socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip Plastic retaining and release clip (supplied with socket - packaging code SPA) Modules (see table below) Timer modules (see table below) Sheet of marker tags for retaining and release clip 095.91.
PAGE 16
40 SERIES 95 Series - Sockets and accessories for 40 series relays A 95.55.3 Approvals (according to type): 095.91.3 Screwless terminal socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip Plastic retaining and release clip (supplied with socket - packaging code SPA) Modules (see table below) Sheet of marker tags for retaining and release clip 095.91.
PAGE 17
40 95 Series - Sockets and accessories for 40 series relays Screw terminal (Box clamp) socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip 8-way jumper link Modules (see table below) Technical data Rated values Dielectric strength (between coil and contacts) Protection category Ambient temperature °C 95.63 Approvals (according to type): Screw torque Wire strip length Max. wire size for 95.63 and 95.65 sockets 095.65 Approvals (according to type): 95.63 (blue) 40.
PAGE 18
40 95.15.2 Approvals (according to type): 95.13.2 (blue) 95.13.20 (black) 95.15.2 (blue) 95.15.20 (black) 40.31 40.51, 40.52, 40.61 095.51 095.52 12 A - 250 V 10 A - 250 V* 6 kV (1.2/50 µs) between coil and contacts IP 20 °C –40…+70 * For currents > 10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12). With the relay 40.51 the change-over contact will be 21-12-14. 40.51 A1 12 11 14 A2 22 21 24 12 14 22 24 11 1.5 3.5 13 7.5 3.5 40.31 21 A1 A2 40.