Datasheet
A
93.52
Approvals
(according to type):
Screw terminal socket 35mm (EN60715) mounting
Supply voltage Relay type Socket type
6VAC/DC 41.52.9.005.0010 or 41.61.9.005.0010 93.52.0.024
12VAC/DC 41.52.9.012.0010 or 41.61.9.012.0010 93.52.0.024
24VAC/DC 41.52/61.9.024.0010 or 41.81.7.024.xxxx 93.52.0.024
60VAC/DC 41.52.9.060.0010 or 41.61.9.060.0010 93.52.0.060
(110…125)VAC/DC 41.52.9.110.0010 or 41.61.9.110.0010 93.52.0.125
(220…240)VAC/DC 41.52.9.110.0010 or 41.61.9.110.0010 93.52.0.240
(230…240)VAC 41.52.9.110.0010 or 41.61.9.110.0010 93.52.8.230
6VDC 41.52.9.005.0010 or 41.61.9.005.0010 93.52.7.024
12VDC 41.52/61.9.012.0010 or 41.81.7.012.xxxx 93.52.7.024
24VDC 41.52/61.9.024.0010 or 41.81.7.024.xxxx 93.52.7.024
48VDC 41.52.9.048.0010 or 41.61.9.048.0010 93.52.7.060
60VDC 41.52.9.060.0010 or 41.61.9.060.0010 93.52.7.060
Accessories
8-way jumper link 093.08 (see table below)
Plastic separator 093.01 (see table below)
Sheet of marker tags, 72 tags 060.72 (see table below)
Technical data
Rated values 10A - 250V
Dielectric strength 6kV (1.2/50μs) between coil and contacts
Protection category IP 20
Ambient temperature (U
N
≤60V/>60V) °C –40…+70/–40…+55
Wire strip length mm 8
Max. wire size for 93.52 socket solid wire stranded wire
mm
2
1x2.5 1x2.5
AWG 1x14 1x14
Note: Not for bistable relays
Accessories
E
U
R
O
P
E
A
N
E
U
R
O
P
E
A
N
PATENT
093.08
Approvals
(according to type):
8-way jumper link for 93.02 and 93.52 sockets 093.08 (blue) 093.08.0 (black) 093.08.1 (red)
Rated values 10A - 250V
093.01
Plastic separator for 93.02 and 93.52 sockets 093.01
Thickness 2mm, required at the start and the end of a group of interfaces.
Can be used for visual separation group, must be used for:
- protective separation of different voltages of neighbouring PLC interfaces according to VDE0106-101
- protection of cut jumper links
060.72
Sheet of marker tags for 38x2, plastic, 72 tags, 6x12mm 060.72
X-2014, www.findernet.com
41
SERIES
9
93 Series - Sockets and accessories for 41 series relays