Data Sheet

VII-2018, www.findernet.com
B
1 CO relay interface modules,
15.8mm wide
Ideal interface for PLC and electronic systems
Type 48.P6
- 1 CO 16A
- Push-in terminals
Type 48.61
- 1 CO 16A
- Screw terminals
• AC coils or DC sensitive coils
• Supply status indication and EMC coil
suppression module as standard
• Identification label
• UL Listing (certain relay/socket combinations)
• 35mm rail (EN60715) mounting
• Cadmium-free contact material available
48.P6
Push-in terminal
48.61
Screw terminal
48.P6 48.61
• 1 CO 16A
• Push-in terminals
• 1 CO 16A
• Screw terminals
48.61 / 81
* For currents >10A, contact terminals
must be connected in parallel
(21 with 11, 24 with 14, 22 with 12).
48.61 / 81
* For currents >10A, contact terminals
must be connected in parallel
(21 with 11, 24 with 14, 22 with 12).For outline drawing see page 11
Contact specification
Contact configuration 1 CO (SPDT) 1 CO (SPDT)
Rated current/Maximum peak current A 16*/30 16*/30
Rated voltage/
Maximum switching voltage VAC 250/400 250/400
Rated load AC1 VA 4000 4000
Rated load AC15 (230VAC) VA 750 750
Single phase motor rating (230VAC) kW 0.55 0.55
Breaking capacity DC1: 30/110/220V A 16/0.3/0.12 16/0.3/0.12
Minimum switching load mW (V/mA) 500 (10/5) 500 (10/5)
Standard contact material AgCdO AgCdO
Coil specification
Nominal voltage (U
N
) VAC (50/60Hz) 12 - 24 - 110 - 120 - 230 12 - 24 - 110 - 120 - 230
VDC 12 - 24 - 125 12 - 24 - 125
Rated power AC/sens. DC VA (50Hz)/W 1.2/0.5 1.2/0.5
Operating range AC (0.8…1.1)U
N
(0.8…1.1)U
N
sens. DC (0.8…1.5)U
N
(0.8…1.5)U
N
Holding voltage AC/DC 0.8U
N
/0.4U
N
0.8U
N
/0.4U
N
Must drop-out voltage AC/DC 0.2U
N
/0.1U
N
0.2U
N
/0.1U
N
Technical data
Mechanical life cycles 10·10
6
10·10
6
Electrical life at rated load AC1 cycles 100·10
3
100·10
3
Operate/release time ms 7/4 (AC) - 12/12 (DC) 7/4 (AC) - 12/12 (DC)
Insulation between coil
and contacts (1.2/50µs) kV 6 (8mm) 6 (8mm)
Dielectric strength
between open contacts VAC 1000 1000
Ambient temperature range °C –40…+70 –40…+70
Protection category IP 20 IP 20
Approvals relay (according to type)
6
48
SERIES
48 SERIES
Relay interface modules 16A