Datasheet

ManualsBrandsFinder ManualsIndustrial RelaysRelay Interface Module 48, 1CO, 16A, Push-In Terminal

X-2017, www.findernet.com

2 CO forcibly guided contacts relay interface

modules,15.8mm wide

Type 48.12

- 2 CO 8A

- Screw terminals

• Relay with forcibly guided contacts according

to EN 61810-3 Type B (previously EN 50205)

• 35mm rail (EN60715) mounting

• Cadmium-free contact material

48.12

Screw terminal

48.12

• 2 CO 8A

• Forcibly guided contacts relay

• Screw terminals

48.12

According to EN 61810-3 only 1 NO and 1 NC

(11-14 and 21-22 or 11-12 and 21-24) shall be

used as forcibly guided contacts.

For outline drawing see page 9

Contact specification

Contact configuration 2 CO (DPDT)

Rated current/Maximum peak current A 8/15

Rated voltage/

Maximum switching voltage VAC 250/400

Rated load AC1 VA 2000

Rated load AC15 (230VAC) VA 500

Single phase motor rating (230VAC) kW 0.37

Breaking capacity DC1: 30/110/220V A 8/0.65/0.2

Minimum switching load mW (V/mA) 500 (10/10)

Standard contact material AgNi+Au

Coil specification

Nominal voltage (U

) VAC (50/60Hz) —

VDC 12 - 24

Rated power AC/DC VA (50Hz)/W —/0.7

Operating range AC —

DC (0.75…1.2)U

Holding voltage AC/DC —/0.4U

Must drop-out voltage AC/DC —/0.1U

Technical data

Mechanical life AC/DC cycles —/10·10

Electrical life at rated load AC1 cycles 100·10

Operate/release time ms 10/4

Insulation between coil

and contacts (1.2/50µs) kV 6 (8mm)

Dielectric strength

between open contacts VAC 1500

Ambient temperature range °C –40…+70

Protection category IP 20

Approvals relay (according to type)

SERIES

48 SERIES

Relay interface modules 8A

Summary of content (10 pages)

PAGE 1
48 SERIES Relay interface modules 8 A 48 SERIES 48.12 2 CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12 - 2 CO 8 A - Screw terminals • Relay with forcibly guided contacts according to EN 61810-3 Type B (previously EN 50205) • 35 mm rail (EN 60715) mounting • Cadmium-free contact material B 48.
PAGE 2
48 SERIES 48 SERIES Relay interface modules 10 A 48.P3 1 CO relay interface modules, 15.8 mm wide 48.31 Ideal interface for PLC and electronic systems Type 48.P3 -- 1 CO 10 A -- Push-in terminals • AC coils or DC sensitive coils • Supply status indication and EMC coil • • • • • 1 CO 10 A • Push-in terminals suppression module as standard Identification label UL Listing (certain relay/socket combinations) 35 mm rail (EN 60715) mounting Cadmium-free contact material 48.
PAGE 3
48 SERIES Relay interface modules 8 A 48 SERIES 48.P5 2 CO relay interface modules, 15.8 mm wide 48.52 Ideal interface for PLC and electronic systems Type 48.P5 -- 2 CO 8 A -- Push-in terminals Type 48.
PAGE 4
8 SERIES 48 SERIES Relay interface modules 16 A 48.P6 1 CO relay interface modules, 15.8 mm wide 48.61 Ideal interface for PLC and electronic systems Type 48.P6 -- 1 CO 16 A -- Push-in terminals • AC coils or DC sensitive coils • Supply status indication and EMC coil • • • • • 1 CO 16 A • Push-in terminals suppression module as standard Identification label UL Listing (certain relay/socket combinations) 35 mm rail (EN 60715) mounting Cadmium-free contact material available 48.
PAGE 5
48 SERIES Relay interface modules 10 A 48 SERIES 48.P8 2 CO relay interface modules, 15.8 mm wide 48.62 Ideal interface for PLC and electronic systems Type 48.P8 -- 2 CO 10 A -- Push-in terminals Type 48.
PAGE 6
48 SERIES Relay interface modules 8 - 10 - 16 A 48 SERIES Ordering information Example: 48 series, 35 mm rail (EN 60715) mount, Push-in terminal relay interface module, 2 CO 8 A contacts, 24 V sensitive DC coil, green LED + diode, 99.02 coil indication. 4 8 . P B C D 5 . 7 . 0 2 4 . 0 0 5 0 A: Contact material 0 = Standard AgNi for 48.P3/P5/P8/31/52/62 AgCdO, Standard for 48.P6/61 4 = AgSnO2, for 48.P6/P8/ 61/62 only 5 = AgNi + Au, for 48.12 and 48.
PAGE 7
48 SERIES Relay interface modules 8 - 10 - 16 A 48 SERIES Contact specification F 48 - Electrical life (AC) v contact current Types 48.P3/P6/31/61 F 48 - Electrical life (AC) v contact current Types 48.P8/62 Cycles Cycles Resistive load - cosϕ = 1 Inductive load- cosϕ = 0.4 B Resistive load - cosϕ = 1 Inductive load- cosϕ = 0.4 limit for 48.31 Resistive load - cosϕ = 1 Inductive load- cosϕ = 0.4 Cycles Resistive load - cosϕ = 1 Inductive load- cosϕ = 0.
PAGE 8
48 SERIES Relay interface modules 8 - 10 - 16 A 48 SERIES Coil specifications DC coil data (0.5 W sensitive) Nominal voltage Coil code UN V B 12 AC coil data Operating range 7.012 Umin* Umax V V 8.8 24 7.024 17.5 125 7.125 91 Rated coil consumption I at UN Nominal voltage UN mA V 12 Coil code Operating range Umin V 8.012 Umax V mA 18 41 36 22.2 24 8.024 19.2 188 4 110 8.110 88 121 10.1 120 8.120 96 132 11.8 230 8.230 184 253 7.0 * Umin = 0.8 UN for 48.
PAGE 9
48 SERIES Relay interface modules 8 - 10 - 16 A Combinations Code 48.12 48.31 48.52 48 SERIES Type of socket Type of relay Module Retaining clip 95.05.7 50.12 — 095.71 95.03 40.31 99.02 095.01 95.05 40.52 99.02 095.01 48.61 95.05 40.61 99.02 095.01 48.62 95.05 44.62 99.02 095.01 48.P3 95.P3 40.31 99.02 095.91.3 48.P5 95.P5 40.52 99.02 095.91.3 48.P6 95.P5 40.61 99.02 095.91.3 48.P8 95.P5 44.62 99.02 095.91.
PAGE 10
48 SERIES Relay interface modules 8 - 10 - 16 A 48 SERIES Accessories 8-way jumper link for type 48.P3/P5/P6/P8 097.58 Rated values 10 A - 250 V 2-way jumper link for type 48.P3/P5/P6/P8 097.52 Rated values 10 A - 250 V 2-way jumper link for type 48.P3/P5/P6/P8 097.42 Rated values 10 A - 250 V Marker tag holder for type 48.P3/P5/P6/P8 and 48.12/31/52/61/62 097.00 097.58 B 097.52 097.42 P A N T E PEAN 095.18 PEAN O O T EUR EUR 097.